Current File : //usr/src/vboxhost-6.0.14/vboxdrv/include/VBox/err.h
/** @file
* VirtualBox Status Codes.
*/
/*
* Copyright (C) 2006-2019 Oracle Corporation
*
* This file is part of VirtualBox Open Source Edition (OSE), as
* available from http://www.virtualbox.org. This file is free software;
* you can redistribute it and/or modify it under the terms of the GNU
* General Public License (GPL) as published by the Free Software
* Foundation, in version 2 as it comes in the "COPYING" file of the
* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
*
* The contents of this file may alternatively be used under the terms
* of the Common Development and Distribution License Version 1.0
* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
* VirtualBox OSE distribution, in which case the provisions of the
* CDDL are applicable instead of those of the GPL.
*
* You may elect to license modified versions of this file under the
* terms and conditions of either the GPL or the CDDL or both.
*/
#ifndef VBOX_INCLUDED_err_h
#define VBOX_INCLUDED_err_h
#ifndef RT_WITHOUT_PRAGMA_ONCE
# pragma once
#endif
#include <VBox/cdefs.h>
#include <iprt/err.h>
/** @defgroup grp_err VBox Error Codes
* @{
*/
/* SED-START */
/** @name Misc. Status Codes
* @{
*/
/** Failed to allocate VM memory. */
#define VERR_NO_VM_MEMORY (-1000)
/** RC is toasted and the VMM should be terminated at once, but no need to
* panic about it :-) */
#define VERR_DONT_PANIC (-1001)
/** Unsupported CPU. */
#define VERR_UNSUPPORTED_CPU (-1002)
/** Unsupported CPU mode. */
#define VERR_UNSUPPORTED_CPU_MODE (-1003)
/** Page not present. */
#define VERR_PAGE_NOT_PRESENT (-1004)
/** Invalid/Corrupted configuration file. */
#define VERR_CFG_INVALID_FORMAT (-1005)
/** No configuration value exists. */
#define VERR_CFG_NO_VALUE (-1006)
/** Selector not present. */
#define VERR_SELECTOR_NOT_PRESENT (-1007)
/** Not code selector. */
#define VERR_NOT_CODE_SELECTOR (-1008)
/** Not data selector. */
#define VERR_NOT_DATA_SELECTOR (-1009)
/** Out of selector bounds. */
#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
/** Invalid selector. Usually beyond table limits. */
#define VERR_INVALID_SELECTOR (-1011)
/** Invalid requested privilege level. */
#define VERR_INVALID_RPL (-1012)
/** PML4 entry not present. */
#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
/** Page directory pointer not present. */
#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
/** Raw mode doesn't support SMP. */
#define VERR_RAW_MODE_INVALID_SMP (-1015)
/** Invalid VM handle. */
#define VERR_INVALID_VM_HANDLE (-1016)
/** Invalid VM handle. */
#define VERR_INVALID_VMCPU_HANDLE (-1017)
/** Invalid Virtual CPU ID. */
#define VERR_INVALID_CPU_ID (-1018)
/** Too many VCPUs. */
#define VERR_TOO_MANY_CPUS (-1019)
/** The service was disabled on the host.
* Returned by pfnInit in VBoxService to indicated a non-fatal error that
* should results in the particular service being disabled. */
#define VERR_SERVICE_DISABLED (-1020)
/** The requested feature is not supported in raw-mode. */
#define VERR_NOT_SUP_IN_RAW_MODE (-1021)
/** Invalid CPU index. */
#define VERR_INVALID_CPU_INDEX (-1022)
/** This VirtualBox build does not support raw-mode. */
#define VERR_RAW_MODE_NOT_SUPPORTED (-1023)
/** Essential fields in the shared VM structure doesn't match the global one. */
#define VERR_INCONSISTENT_VM_HANDLE (-1024)
/** The VM has been restored. */
#define VERR_VM_RESTORED (-1025)
/** @} */
/** @name Execution Monitor/Manager (EM) Status Codes
*
* The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
* are of vital importance. The lower the number the higher importance
* as a scheduling instruction.
* @{
*/
/** First scheduling related status code. */
#define VINF_EM_FIRST 1100
/** Indicating that the VM is being terminated and that the execution
* shall stop. */
#define VINF_EM_TERMINATE 1100
/** Hypervisor code was stepped.
* EM will first send this to the debugger, and if the issue isn't
* resolved there it will enter guru meditation. */
#define VINF_EM_DBG_HYPER_STEPPED 1101
/** Hit a breakpoint in the hypervisor code,
* EM will first send this to the debugger, and if the issue isn't
* resolved there it will enter guru meditation. */
#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
/** Hit a possible assertion in the hypervisor code,
* EM will first send this to the debugger, and if the issue isn't
* resolved there it will enter guru meditation. */
#define VINF_EM_DBG_HYPER_ASSERTION 1103
/** Generic debug event, suspend the VM for debugging. */
#define VINF_EM_DBG_EVENT 1104
/** Indicating that the VM should be suspended for debugging because
* the developer wants to inspect the VM state. */
#define VINF_EM_DBG_STOP 1105
/** Indicating success single stepping and that EM should report that
* event to the debugger. */
#define VINF_EM_DBG_STEPPED 1106
/** Indicating that a breakpoint was hit and that EM should notify the debugger
* and in the event there is no debugger fail fatally. */
#define VINF_EM_DBG_BREAKPOINT 1107
/** Indicating that EM should single step an instruction.
* The instruction is stepped in the current execution mode (RAW/REM). */
#define VINF_EM_DBG_STEP 1108
/** Indicating that the VM is being turned off and that the EM should
* exit to the VM awaiting the destruction request. */
#define VINF_EM_OFF 1109
/** Indicating that the VM has been suspended and that the thread
* should wait for request telling it what to do next. */
#define VINF_EM_SUSPEND 1110
/** Indicating that the VM has been reset and that scheduling goes
* back to startup defaults. */
#define VINF_EM_RESET 1111
/** Indicating that the VM has executed a halt instruction and that
* the emulation thread should wait for an interrupt before resuming
* execution. */
#define VINF_EM_HALT 1112
/** Indicating that the VM has been resumed and that the thread should
* start executing. */
#define VINF_EM_RESUME 1113
/** Indicating that we've got an out-of-memory condition and that we need
* to take the appropriate actions to deal with this.
* @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
* VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
* vital to correctly operating the VM. Also, they can't normally occur together
* with an out-of-memory condition, and even if that should happen the condition
* will be rediscovered before executing any more code. */
#define VINF_EM_NO_MEMORY 1114
/** The fatal variant of VINF_EM_NO_MEMORY. */
#define VERR_EM_NO_MEMORY (-1114)
/** Indicating that a rescheduling to recompiled execution.
* Typically caused by raw-mode executing code which is difficult/slow
* to virtualize rawly.
* @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
#define VINF_EM_RESCHEDULE_REM 1115
/** Indicating that a rescheduling to vmx-mode execution (HM/NEM).
* Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
#define VINF_EM_RESCHEDULE_HM 1116
/** Indicating that a rescheduling to raw-mode execution.
* Typically caused by REM detecting that raw-mode execution is possible.
* @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
#define VINF_EM_RESCHEDULE_RAW 1117
/** Indicating that a rescheduling now is required. Typically caused by
* interrupts having changed the EIP. */
#define VINF_EM_RESCHEDULE 1118
/** PARAV call */
#define VINF_EM_RESCHEDULE_PARAV 1119
/** Go back into wait for SIPI mode */
#define VINF_EM_WAIT_SIPI 1120
/** Last scheduling related status code. (inclusive) */
#define VINF_EM_LAST 1120
/** Reason for leaving RC: Guest trap which couldn't be handled in RC.
* The trap is generally forwarded to the REM and executed there. */
#define VINF_EM_RAW_GUEST_TRAP 1121
/** Reason for leaving RC: Interrupted by external interrupt.
* The interrupt needed to be handled by the host OS. */
#define VINF_EM_RAW_INTERRUPT 1122
/** Reason for leaving RC: Interrupted by external interrupt while in hypervisor
* code. The interrupt needed to be handled by the host OS and hypervisor
* execution must be resumed. VM state is not complete at this point. */
#define VINF_EM_RAW_INTERRUPT_HYPER 1123
/** Reason for leaving RC: A Ring switch was attempted.
* Normal cause of action is to execute this in REM. */
#define VINF_EM_RAW_RING_SWITCH 1124
/** Reason for leaving RC: A Ring switch was attempted using software interrupt.
* Normal cause of action is to execute this in REM. */
#define VINF_EM_RAW_RING_SWITCH_INT 1125
/** Reason for leaving RC: A privileged instruction was attempted executed.
* Normal cause of action is to execute this in REM. */
#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
/** Reason for leaving RZ: Emulate instruction. */
#define VINF_EM_RAW_EMULATE_INSTR 1127
/** Reason for leaving RC: Unhandled TSS write.
* Recompiler gets control. */
#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
/** Reason for leaving RC: Unhandled LDT write.
* Recompiler gets control. */
#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
/** Reason for leaving RC: Unhandled IDT write.
* Recompiler gets control. */
#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
/** Reason for leaving RC: Partly handled GDT write.
* Recompiler gets control. */
#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
/** Reason for leaving RC: jump inside generated patch jump.
* Fatal error. */
#define VERR_EM_RAW_PATCH_CONFLICT (-1133)
/** Reason for leaving RZ: Ring-3 operation pending. */
#define VINF_EM_RAW_TO_R3 1135
/** Reason for leaving RZ: Timer pending. */
#define VINF_EM_RAW_TIMER_PENDING 1136
/** Reason for leaving RC: Interrupt pending (guest). */
#define VINF_EM_RAW_INTERRUPT_PENDING 1137
/** Reason for leaving RC: Encountered a stale selector. */
#define VINF_EM_RAW_STALE_SELECTOR 1138
/** Reason for leaving RC: The IRET resuming guest code trapped. */
#define VINF_EM_RAW_IRET_TRAP 1139
/** The interpreter was unable to deal with the instruction at hand. */
#define VERR_EM_INTERPRETER (-1148)
/** Internal EM error caused by an unknown warning or informational status code. */
#define VERR_EM_INTERNAL_ERROR (-1149)
/** Pending VM request packet. */
#define VINF_EM_PENDING_REQUEST 1150
/** Start instruction stepping (debug only). */
#define VINF_EM_RAW_EMULATE_DBG_STEP 1151
/** Patch TPR access instruction. */
#define VINF_EM_HM_PATCH_TPR_INSTR 1152
/** Unexpected guest mapping conflict detected. */
#define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154)
/** Reason for leaving RC: A triple-fault condition. Currently, causes
* a guru meditation. */
#define VINF_EM_TRIPLE_FAULT 1155
/** The specified execution engine cannot execute guest code in the current
* state. */
#define VERR_EM_CANNOT_EXEC_GUEST (-1156)
/** Reason for leaving RC: Inject a TRPM event. */
#define VINF_EM_RAW_INJECT_TRPM_EVENT 1157
/** Guest tried to trigger a CPU hang. The guest is probably up to no good. */
#define VERR_EM_GUEST_CPU_HANG (-1158)
/** Reason for leaving RZ: Pending ring-3 IN instruction. */
#define VINF_EM_PENDING_R3_IOPORT_READ 1159
/** Reason for leaving RZ: Pending ring-3 OUT instruction. */
#define VINF_EM_PENDING_R3_IOPORT_WRITE 1160
/** Trick for resuming EMHistoryExec after a VMCPU_FF_IOM is handled. */
#define VINF_EM_RESUME_R3_HISTORY_EXEC 1161
/** @} */
/** @name Debugging Facility (DBGF) DBGF Status Codes
* @{
*/
/** The function called requires the caller to be attached as a
* debugger to the VM. */
#define VERR_DBGF_NOT_ATTACHED (-1200)
/** Someone (including the caller) was already attached as
* debugger to the VM. */
#define VERR_DBGF_ALREADY_ATTACHED (-1201)
/** Tried to halt a debugger which was already halted.
* (This is a warning and not an error.) */
#define VWRN_DBGF_ALREADY_HALTED 1202
/** The DBGF has no more free breakpoint slots. */
#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
/** The DBGF couldn't find the specified breakpoint. */
#define VERR_DBGF_BP_NOT_FOUND (-1204)
/** Attempted to enabled a breakpoint which was already enabled. */
#define VINF_DBGF_BP_ALREADY_ENABLED 1205
/** Attempted to disabled a breakpoint which was already disabled. */
#define VINF_DBGF_BP_ALREADY_DISABLED 1206
/** The breakpoint already exists. */
#define VINF_DBGF_BP_ALREADY_EXIST 1207
/** The byte string was not found. */
#define VERR_DBGF_MEM_NOT_FOUND (-1208)
/** The OS was not detected. */
#define VERR_DBGF_OS_NOT_DETCTED (-1209)
/** The OS was not detected. */
#define VINF_DBGF_OS_NOT_DETCTED 1209
/** The specified register was not found. */
#define VERR_DBGF_REGISTER_NOT_FOUND (-1210)
/** The value was truncated to fit.
* For queries this means that the register is wider than the queried value.
* For setters this means that the value is wider than the register. */
#define VINF_DBGF_TRUNCATED_REGISTER 1211
/** The value was zero extended to fit.
* For queries this means that the register is narrower than the queried value.
* For setters this means that the value is narrower than the register. */
#define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212
/** The requested type conversion was not supported. */
#define VERR_DBGF_UNSUPPORTED_CAST (-1213)
/** The register is read-only and cannot be modified. */
#define VERR_DBGF_READ_ONLY_REGISTER (-1214)
/** Internal processing error \#1 in the DBGF register code. */
#define VERR_DBGF_REG_IPE_1 (-1215)
/** Internal processing error \#2 in the DBGF register code. */
#define VERR_DBGF_REG_IPE_2 (-1216)
/** Unhandled \#DB in hypervisor code. */
#define VERR_DBGF_HYPER_DB_XCPT (-1217)
/** Internal processing error \#1 in the DBGF stack code. */
#define VERR_DBGF_STACK_IPE_1 (-1218)
/** Internal processing error \#2 in the DBGF stack code. */
#define VERR_DBGF_STACK_IPE_2 (-1219)
/** No trace buffer available, please change the VM config. */
#define VERR_DBGF_NO_TRACE_BUFFER (-1220)
/** @} */
/** @name Patch Manager (PATM) Status Codes
* @{
*/
/** Non fatal Patch Manager analysis phase warning */
#define VWRN_CONTINUE_ANALYSIS 1400
/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
/** Patch installation refused (patch too complex or unsupported instructions ) */
#define VERR_PATCHING_REFUSED (-1401)
/** Unable to find patch */
#define VERR_PATCH_NOT_FOUND (-1402)
/** Patch disabled */
#define VERR_PATCH_DISABLED (-1403)
/** Patch enabled */
#define VWRN_PATCH_ENABLED 1404
/** Patch was already disabled */
#define VERR_PATCH_ALREADY_DISABLED (-1405)
/** Patch was already enabled */
#define VERR_PATCH_ALREADY_ENABLED (-1406)
/** Patch was removed. */
#define VWRN_PATCH_REMOVED 1407
/** Reason for leaving RC: \#GP with EIP pointing to patch code. */
#define VINF_PATM_PATCH_TRAP_GP 1408
/** First leave RC code. */
#define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP
/** Reason for leaving RC: \#PF with EIP pointing to patch code. */
#define VINF_PATM_PATCH_TRAP_PF 1409
/** Reason for leaving RC: int3 with EIP pointing to patch code. */
#define VINF_PATM_PATCH_INT3 1410
/** Reason for leaving RC: \#PF for monitored patch page. */
#define VINF_PATM_CHECK_PATCH_PAGE 1411
/** Reason for leaving RC: duplicate instruction called at current eip. */
#define VINF_PATM_DUPLICATE_FUNCTION 1412
/** Execute one instruction with the recompiler */
#define VINF_PATCH_EMULATE_INSTR 1413
/** Reason for leaving RC: attempt to patch MMIO write. */
#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
/** Reason for leaving RC: attempt to patch MMIO read. */
#define VINF_PATM_HC_MMIO_PATCH_READ 1415
/** Reason for leaving RC: pending irq after iret that sets IF. */
#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
/** Last leave RC code. */
#define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
/** No conflicts to resolve */
#define VERR_PATCH_NO_CONFLICT (-1425)
/** Detected unsafe code for patching */
#define VERR_PATM_UNSAFE_CODE (-1426)
/** Terminate search branch */
#define VWRN_PATCH_END_BRANCH 1427
/** Already patched */
#define VERR_PATM_ALREADY_PATCHED (-1428)
/** Spinlock detection failed. */
#define VINF_PATM_SPINLOCK_FAILED (1429)
/** Continue execution after patch trap. */
#define VINF_PATCH_CONTINUE (1430)
/** The patch manager is not used because we're using HM and VT-x/AMD-V. */
#define VERR_PATM_HM_IPE (-1431)
/** Unexpected trap in patch code. */
#define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432)
/** @} */
/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
* @{
*/
/** Trap not handled */
#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
/** Patch installed */
#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
/** Page record not found */
#define VWRN_CSAM_PAGE_NOT_FOUND 1502
/** Reason for leaving RC: CSAM wants perform a task in ring-3. */
#define VINF_CSAM_PENDING_ACTION 1503
/** The CSAM is not used because we're using HM and VT-x/AMD-V. */
#define VERR_CSAM_HM_IPE (-1504)
/** @} */
/** @name Page Monitor/Manager (PGM) Status Codes
* @{
*/
/** Attempt to create a GC mapping which conflicts with an existing mapping. */
#define VERR_PGM_MAPPING_CONFLICT (-1600)
/** The physical handler range has no corresponding RAM range.
* If this is MMIO, see todo above the return. If not MMIO, then it's
* someone else's fault... */
#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
/** Attempt to register an access handler for a virtual range of which a part
* was already handled. */
#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
/** Attempt to register an access handler for a physical range of which a part
* was already handled. */
#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
/** Invalid page directory specified to PGM. */
#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
/** Invalid GC physical address. */
#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
/** Invalid GC physical range. Usually used when a specified range crosses
* a RAM region boundary. */
#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
/** Specified access handler was not found. */
#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
/** Attempt to register a RAM range of which parts are already
* covered by existing RAM ranges. */
#define VERR_PGM_RAM_CONFLICT (-1608)
/** Failed to add new mappings because the current mappings are fixed
* in guest os memory. */
#define VERR_PGM_MAPPINGS_FIXED (-1609)
/** Failed to fix mappings because of a conflict with the intermediate code. */
#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
/** Failed to fix mappings because a mapping rejected the address. */
#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
/** Failed to fix mappings because the proposed memory area was to small. */
#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
/** Reason for leaving RZ: The urge to syncing CR3. */
#define VINF_PGM_SYNC_CR3 1613
/** Page not marked for dirty bit tracking */
#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
/** Page fault caused by dirty bit tracking; corrected */
#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
/** Go ahead with the default Read/Write operation.
* This is returned by a R3 physical or virtual handler when it wants the
* PGMPhys[Read|Write] routine do the reading/writing. */
#define VINF_PGM_HANDLER_DO_DEFAULT 1616
/** The paging mode of the host is not supported yet. */
#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
/** The physical guest page is a reserved/MMIO page and does not have any HC
* address. */
#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
/** No page directory available for the hypervisor. */
#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
/** The returned shadow page is cached. */
#define VINF_PGM_CACHED_PAGE 1622
/** Returned by handler registration, modification and deregistration
* when the shadow PTs could be updated because the guest page
* aliased or/and mapped by multiple PTs. */
#define VINF_PGM_GCPHYS_ALIASED 1623
/** Reason for leaving RC: Paging mode changed.
* PGMChangeMode() uses this to force a switch to R3 so it can safely deal with
* a mode switch. */
#define VINF_PGM_CHANGE_MODE 1624
/** SyncPage modified the PDE.
* This is an internal status code used to communicate back to the \#PF handler
* that the PDE was (probably) marked not-present and it should restart the instruction. */
#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
/** Conflict between the core memory and the intermediate paging context, try again.
* There are some very special conditions applying to the intermediate paging context
* (used during the world switches), and some times we continuously run into these
* when asking the host kernel for memory during VM init. Let us know if you run into
* this and we'll adjust the code so it tries harder to avoid it.
*/
#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
/** The shadow paging mode is not supported yet. */
#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
/** The dynamic mapping cache for physical memory failed. */
#define VERR_PGM_DYNMAP_FAILED (-1629)
/** The auto usage cache for the dynamic mapping set is full. */
#define VERR_PGM_DYNMAP_FULL_SET (-1630)
/** The initialization of the dynamic mapping cache failed. */
#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
/** The expanding of the dynamic mapping cache failed. */
#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
/** Catch any access and route it thru PGM. */
#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
/** Catch write access and route it thru PGM. */
#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
/** Catch write access and route it thru PGM. */
#define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635)
/** No CR3 root shadow page table. */
#define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636)
/** Trying to free a page with an invalid Page ID. */
#define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637)
/** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */
#define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638)
/** Trying to free a page that isn't RAM. */
#define VERR_PGM_PHYS_NOT_RAM (-1639)
/** Not ROM page. */
#define VERR_PGM_PHYS_NOT_ROM (-1640)
/** Not MMIO page. */
#define VERR_PGM_PHYS_NOT_MMIO (-1641)
/** Not MMIO2 page. */
#define VERR_PGM_PHYS_NOT_MMIO2 (-1642)
/** Already aliased to a different page. */
#define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643)
/** Already aliased to the same page. */
#define VINF_PGM_HANDLER_ALREADY_ALIASED (1643)
/** PGM pool flush pending - return to ring 3. */
#define VINF_PGM_POOL_FLUSH_PENDING (1644)
/** Unable to use the range for a large page. */
#define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645)
/** Don't mess around with ballooned pages. */
#define VERR_PGM_PHYS_PAGE_BALLOONED (-1646)
/** Internal processing error \#1 in page access handler code. */
#define VERR_PGM_HANDLER_IPE_1 (-1647)
/** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */
#define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651)
/** Guest mappings are disabled. */
#define VERR_PGM_MAPPINGS_DISABLED (-1652)
/** No guest mappings when SMP is enabled. */
#define VERR_PGM_MAPPINGS_SMP (-1653)
/** Invalid saved page state. */
#define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654)
/** Encountered an unexpected page type in the saved state. */
#define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655)
/** Encountered an unexpected page state in the saved state. */
#define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656)
/** Couldn't find MMIO2 range from saved state. */
#define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657)
/** Couldn't find MMIO2 page from saved state. */
#define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658)
/** Couldn't find ROM range from saved state. */
#define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659)
/** Couldn't find ROM page from saved state. */
#define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660)
/** ROM page mismatch between saved state and the VM. */
#define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661)
/** Unknown saved state record. */
#define VERR_PGM_SAVED_REC_TYPE (-1662)
/** Internal processing error in the PGM dynmap (r0/rc). */
#define VERR_PGM_DYNMAP_IPE (-1663)
/** Internal processing error in the PGM handy page allocator. */
#define VERR_PGM_HANDY_PAGE_IPE (-1664)
/** Failed to map the guest PML4. */
#define VERR_PGM_PML4_MAPPING (-1665)
/** Failed to obtain a pool page. */
#define VERR_PGM_POOL_GET_PAGE_FAILED (-1666)
/** A PGM function was called in a mode where it isn't supposed to be used. */
#define VERR_PGM_NOT_USED_IN_MODE (-1667)
/** The CR3 address specified memory we don't know about. */
#define VERR_PGM_INVALID_CR3_ADDR (-1668)
/** One or the PDPEs specified memory we don't know about. */
#define VERR_PGM_INVALID_PDPE_ADDR (-1669)
/** Internal processing error in the PGM physical handler code. */
#define VERR_PGM_PHYS_HANDLER_IPE (-1670)
/** Internal processing error \#1 in the PGM physial page mapping code. */
#define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671)
/** Internal processing error \#2 in the PGM physial page mapping code. */
#define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672)
/** Internal processing error \#3 in the PGM physial page mapping code. */
#define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673)
/** Internal processing error \#4 in the PGM physial page mapping code. */
#define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674)
/** Too many loops looking for a page to reuse. */
#define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675)
/** Internal processing error related to guest mappings. */
#define VERR_PGM_MAPPING_IPE (-1676)
/** An attempt was made to grow an already maxed out page pool. */
#define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677)
/** Internal processing error in the page pool code. */
#define VERR_PGM_POOL_IPE (-1678)
/** The write monitor is already engaged. */
#define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679)
/** Failed to get a guest page which is expected to be present. */
#define VERR_PGM_PHYS_PAGE_GET_IPE (-1680)
/** We were given a NULL pPage parameter. */
#define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681)
/** PCI passthru is not supported by this build. */
#define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682)
/** Too many MMIO2 ranges. */
#define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683)
/** Internal processing error in the PGM physical page mapping code dealing
* with MMIO2 pages. */
#define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684)
/** Internal processing error in the PGM physcal page handling code related to
* MMIO/MMIO2. */
#define VERR_PGM_PHYS_MMIO_EX_IPE (-1685)
/** Mode table internal error. */
#define VERR_PGM_MODE_IPE (-1686)
/** Shadow mode 'none' internal error. */
#define VERR_PGM_SHW_NONE_IPE (-1687)
/** @} */
/** @name Memory Monitor (MM) Status Codes
* @{
*/
/** Attempt to register a RAM range of which parts are already
* covered by existing RAM ranges. */
#define VERR_MM_RAM_CONFLICT (-1700)
/** Hypervisor memory allocation failed. */
#define VERR_MM_HYPER_NO_MEMORY (-1701)
/** A bad trap type ended up in mmGCRamTrap0eHandler. */
#define VERR_MM_BAD_TRAP_TYPE_IPE (-1702)
/** @} */
/** @name CPU Monitor (CPUM) Status Codes
* @{
*/
/** The caller shall raise an \#GP(0) exception. */
#define VERR_CPUM_RAISE_GP_0 (-1750)
/** Incompatible CPUM configuration. */
#define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751)
/** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden
* parts of the CS register. */
#define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752)
/** Couldn't find the end of CPUID sub-leaves. */
#define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753)
/** CPUM internal processing error \#1. */
#define VERR_CPUM_IPE_1 (-1754)
/** CPUM internal processing error \#2. */
#define VERR_CPUM_IPE_2 (-1755)
/** The specified CPU cannot be found in the CPU database. */
#define VERR_CPUM_DB_CPU_NOT_FOUND (-1756)
/** Invalid CPUMCPU offset in MSR range. */
#define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757)
/** Return to ring-3 to read the MSR there. */
#define VINF_CPUM_R3_MSR_READ (1758)
/** Return to ring-3 to write the MSR there. */
#define VINF_CPUM_R3_MSR_WRITE (1759)
/** Too many CPUID leaves. */
#define VERR_TOO_MANY_CPUID_LEAVES (-1760)
/** Invalid config value. */
#define VERR_CPUM_INVALID_CONFIG_VALUE (-1761)
/** The loaded XSAVE component mask is not compatible with the host CPU
* or/and VM config. */
#define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762)
/** The loaded XSAVE component mask is not valid. */
#define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763)
/** The loaded XSAVE header is not valid. */
#define VERR_CPUM_INVALID_XSAVE_HDR (-1764)
/** The loaded XCR0 register value is not valid. */
#define VERR_CPUM_INVALID_XCR0 (-1765)
/** Indicates that we modified the host CR0 (FPU related). */
#define VINF_CPUM_HOST_CR0_MODIFIED (1766)
/** Invalid/unsupported nested hardware virtualization configuration. */
#define VERR_CPUM_INVALID_HWVIRT_CONFIG (-1767)
/** Invalid nested hardware virtualization feature combination. */
#define VERR_CPUM_INVALID_HWVIRT_FEAT_COMBO (-1768)
/** @} */
/** @name Save State Manager (SSM) Status Codes
* @{
*/
/** The specified data unit already exist. */
#define VERR_SSM_UNIT_EXISTS (-1800)
/** The specified data unit wasn't found. */
#define VERR_SSM_UNIT_NOT_FOUND (-1801)
/** The specified data unit wasn't owned by caller. */
#define VERR_SSM_UNIT_NOT_OWNER (-1802)
/** General saved state file integrity error. */
#define VERR_SSM_INTEGRITY (-1810)
/** The saved state file magic was not recognized. */
#define VERR_SSM_INTEGRITY_MAGIC (-1811)
/** The saved state file version is not supported. */
#define VERR_SSM_INTEGRITY_VERSION (-1812)
/** The saved state file size didn't match the one in the header. */
#define VERR_SSM_INTEGRITY_SIZE (-1813)
/** The CRC of the saved state file did not match. */
#define VERR_SSM_INTEGRITY_CRC (-1814)
/** The machine uuid field wasn't null. */
#define VERR_SMM_INTEGRITY_MACHINE (-1815)
/** Saved state header integrity error. */
#define VERR_SSM_INTEGRITY_HEADER (-1816)
/** Unit header integrity error. */
#define VERR_SSM_INTEGRITY_UNIT (-1817)
/** Invalid unit magic (internal data tag). */
#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818)
/** The file contained a data unit which no-one wants. */
#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819)
/** Incorrect version numbers in the header. */
#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820)
/** Footer integrity error. */
#define VERR_SSM_INTEGRITY_FOOTER (-1821)
/** Record header integrity error. */
#define VERR_SSM_INTEGRITY_REC_HDR (-1822)
/** Termination record integrity error. */
#define VERR_SSM_INTEGRITY_REC_TERM (-1823)
/** Termination record CRC mismatch. */
#define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824)
/** Decompression integrity error. */
#define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825)
/** Saved state directory wintertides error. */
#define VERR_SSM_INTEGRITY_DIR (-1826)
/** The saved state directory magic is wrong. */
#define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827)
/** A data unit in the saved state file was defined but didn't any
* routine for processing it. */
#define VERR_SSM_NO_LOAD_EXEC (-1830)
/** A restore routine attempted to load more data then the unit contained. */
#define VERR_SSM_LOADED_TOO_MUCH (-1831)
/** Not in the correct state for the attempted operation. */
#define VERR_SSM_INVALID_STATE (-1832)
/** Not in the correct state for the attempted operation. */
#define VERR_SSM_LOADED_TOO_LITTLE (-1833)
/** Unsupported data unit version.
* A SSM user returns this if it doesn't know the u32Version. */
#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840)
/** The format of a data unit has changed.
* A SSM user returns this if it's not able to read the format for
* other reasons than u32Version. */
#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841)
/** The CPUID instruction returns different information when loading than when saved.
* Normally caused by hardware changes on the host, but could also be caused by
* changes in the BIOS setup. */
#define VERR_SSM_LOAD_CPUID_MISMATCH (-1842)
/** The RAM size differs between the saved state and the VM config. */
#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843)
/** The state doesn't match the VM configuration in one or another way.
* (There are certain PCI reconfiguration which the OS could potentially
* do which can cause this problem. Check this out when it happens.) */
#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844)
/** The virtual clock frequency differs too much.
* The clock source for the virtual time isn't reliable or the code have changed. */
#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845)
/** A timeout occurred while waiting for async IDE operations to finish. */
#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846)
/** One of the structure magics was wrong. */
#define VERR_SSM_STRUCTURE_MAGIC (-1847)
/** The data in the saved state doesn't conform to expectations. */
#define VERR_SSM_UNEXPECTED_DATA (-1848)
/** Trying to read a 64-bit guest physical address into a 32-bit variable. */
#define VERR_SSM_GCPHYS_OVERFLOW (-1849)
/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
#define VERR_SSM_GCPTR_OVERFLOW (-1850)
/** Vote for another pass. */
#define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851
/** Vote for done tell SSM not to call again until the final pass. */
#define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852
/** Vote for giving up. */
#define VERR_SSM_VOTE_FOR_GIVING_UP (-1853)
/** Don't call again until the final pass. */
#define VINF_SSM_DONT_CALL_AGAIN 1854
/** Giving up a live snapshot/teleportation attempt because of too many
* passes. */
#define VERR_SSM_TOO_MANY_PASSES (-1855)
/** Giving up a live snapshot/teleportation attempt because the state grew to
* big. */
#define VERR_SSM_STATE_GREW_TOO_BIG (-1856)
/** Giving up a live snapshot attempt because we're low on disk space. */
#define VERR_SSM_LOW_ON_DISK_SPACE (-1857)
/** The operation was cancelled. */
#define VERR_SSM_CANCELLED (-1858)
/** Nothing that can be cancelled. */
#define VERR_SSM_NO_PENDING_OPERATION (-1859)
/** The operation has already been cancelled. */
#define VERR_SSM_ALREADY_CANCELLED (-1860)
/** The machine was powered off while saving. */
#define VERR_SSM_LIVE_POWERED_OFF (-1861)
/** The live snapshot/teleportation operation was aborted because of a guru
* meditation. */
#define VERR_SSM_LIVE_GURU_MEDITATION (-1862)
/** The live snapshot/teleportation operation was aborted because of a fatal
* runtime error. */
#define VERR_SSM_LIVE_FATAL_ERROR (-1863)
/** The VM was suspended before or while saving, don't resume execution. */
#define VINF_SSM_LIVE_SUSPENDED 1864
/** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the
* extended API. */
#define VERR_SSM_FIELD_COMPLEX (-1864)
/** Invalid size of a SSM field with the specified transformation. */
#define VERR_SSM_FIELD_INVALID_SIZE (-1865)
/** The specified field is outside the structure. */
#define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866)
/** The field does not follow immediately the previous one. */
#define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867)
/** The field contains an invalid callback or transformation index. */
#define VERR_SSM_FIELD_INVALID_CALLBACK (-1868)
/** The field contains an invalid padding size. */
#define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869)
/** The field contains a value that is out of range. */
#define VERR_SSM_FIELD_INVALID_VALUE (-1870)
/** Generic stream error. */
#define VERR_SSM_STREAM_ERROR (-1871)
/** SSM did a callback for a pass we didn't expect. */
#define VERR_SSM_UNEXPECTED_PASS (-1872)
/** Someone is trying to skip backwards in the stream... */
#define VERR_SSM_SKIP_BACKWARDS (-1873)
/** Someone is trying to write a memory block which is too big to encode. */
#define VERR_SSM_MEM_TOO_BIG (-1874)
/** Encountered an bad (/unknown) record type. */
#define VERR_SSM_BAD_REC_TYPE (-1875)
/** Internal processing error \#1 in SSM code. */
#define VERR_SSM_IPE_1 (-1876)
/** Internal processing error \#2 in SSM code. */
#define VERR_SSM_IPE_2 (-1877)
/** Internal processing error \#3 in SSM code. */
#define VERR_SSM_IPE_3 (-1878)
/** A field contained an transformation that should only be used when loading
* old states. */
#define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879)
/** @} */
/** @name Virtual Machine (VM) Status Codes
* @{
*/
/** The specified at reset handler wasn't found. */
#define VERR_VM_ATRESET_NOT_FOUND (-1900)
/** Invalid VM request type.
* For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
* all the other occurrences it means indicates corruption, broken logic, or stupid
* interface user. */
#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
/** Invalid VM request state.
* The state of the request packet was not the expected and accepted one(s). Either
* the interface user screwed up, or we've got corruption/broken logic. */
#define VERR_VM_REQUEST_STATE (-1902)
/** Invalid VM request packet.
* One or more of the VM controlled packet members didn't contain the correct
* values. Some thing's broken. */
#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
/** The status field has not been updated yet as the request is still
* pending completion. Someone queried the iStatus field before the request
* has been fully processed. */
#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
/** The request has been freed, don't read the status now.
* Someone is reading the iStatus field of a freed request packet. */
#define VERR_VM_REQUEST_STATUS_FREED (-1905)
/** A VM api requiring EMT was called from another thread.
* Use the VMR3ReqCall() apis to call it! */
#define VERR_VM_THREAD_NOT_EMT (-1906)
/** The VM state was invalid for the requested operation.
* Go check the 'VM Statechart Diagram.gif'. */
#define VERR_VM_INVALID_VM_STATE (-1907)
/** The support driver is not installed.
* On linux, open returned ENOENT. */
#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
/** The support driver is not accessible.
* On linux, open returned EPERM. */
#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
/** Was not able to load the support driver.
* On linux, open returned ENODEV. */
#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
/** Was not able to open the support driver.
* Generic open error used when none of the other ones fit. */
#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
/** The installed support driver doesn't match the version of the user. */
#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
/** Saving the VM state is temporarily not allowed. Try again later. */
#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
/** An EMT called an API which cannot be called on such a thread. */
#define VERR_VM_THREAD_IS_EMT (-1914)
/** Encountered an unexpected VM state. */
#define VERR_VM_UNEXPECTED_VM_STATE (-1915)
/** Unexpected unstable VM state. */
#define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916)
/** Too many arguments passed to a VM request / request corruption. */
#define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917)
/** Fatal EMT wait error. */
#define VERR_VM_FATAL_WAIT_ERROR (-1918)
/** The VM request was killed at VM termination. */
#define VERR_VM_REQUEST_KILLED (-1919)
/** @} */
/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
* @{
*/
/** Successful completion of operation (mapped to generic iprt status code). */
#define VINF_VRDP_SUCCESS VINF_SUCCESS
/** VRDP transport operation timed out (mapped to generic iprt status code). */
#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
/** Unsupported ISO protocol feature */
#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
/** Security (en/decryption) engine error */
#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
/** VRDP protocol violation */
#define VERR_VRDP_PROTOCOL_ERROR (-2002)
/** Unsupported VRDP protocol feature */
#define VERR_VRDP_NOT_SUPPORTED (-2003)
/** VRDP protocol violation, client sends less data than expected */
#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
/** Internal error, VRDP packet is in wrong operation mode */
#define VERR_VRDP_INVALID_MODE (-2005)
/** Memory allocation failed */
#define VERR_VRDP_NO_MEMORY (-2006)
/** Client has been rejected */
#define VERR_VRDP_ACCESS_DENIED (-2007)
/** VRPD receives a packet that is not supported */
#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
/** VRDP script allowed the packet to be processed further */
#define VINF_VRDP_PROCESS_PDU 2009
/** VRDP script has completed its task */
#define VINF_VRDP_OPERATION_COMPLETED 2010
/** VRDP thread has started OK and will run */
#define VINF_VRDP_THREAD_STARTED 2011
/** Framebuffer is resized, terminate send bitmap procedure */
#define VINF_VRDP_RESIZE_REQUESTED 2012
/** Output can be enabled for the client. */
#define VINF_VRDP_OUTPUT_ENABLE 2013
/** @} */
/** @name Configuration Manager (CFGM) Status Codes
* @{
*/
/** The integer value was too big for the requested representation. */
#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
/** Child node was not found. */
#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
/** Path to child node was invalid (i.e. empty). */
#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
/** Value not found. */
#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
/** No parent node specified. */
#define VERR_CFGM_NO_PARENT (-2104)
/** No node was specified. */
#define VERR_CFGM_NO_NODE (-2105)
/** The value is not an integer. */
#define VERR_CFGM_NOT_INTEGER (-2106)
/** The value is not a zero terminated character string. */
#define VERR_CFGM_NOT_STRING (-2107)
/** The value is not a byte string. */
#define VERR_CFGM_NOT_BYTES (-2108)
/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
/** The path of a new node contained slashes or was empty. */
#define VERR_CFGM_INVALID_NODE_PATH (-2160)
/** A new node couldn't be inserted because one with the same name exists. */
#define VERR_CFGM_NODE_EXISTS (-2161)
/** A new leaf couldn't be inserted because one with the same name exists. */
#define VERR_CFGM_LEAF_EXISTS (-2162)
/** An unknown config value was encountered. */
#define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163)
/** An unknown config node (key) was encountered. */
#define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164)
/** Internal processing error \#1 in CFGM. */
#define VERR_CFGM_IPE_1 (-2165)
/** @} */
/** @name Time Manager (TM) Status Codes
* @{
*/
/** The loaded timer state was incorrect. */
#define VERR_TM_LOAD_STATE (-2200)
/** The timer was not in the correct state for the request operation. */
#define VERR_TM_INVALID_STATE (-2201)
/** The timer was in a unknown state. Corruption or stupid coding error. */
#define VERR_TM_UNKNOWN_STATE (-2202)
/** The timer was stuck in an unstable state until we grew impatient and returned. */
#define VERR_TM_UNSTABLE_STATE (-2203)
/** TM requires GIP. */
#define VERR_TM_GIP_REQUIRED (-2204)
/** TM does not support the GIP version. */
#define VERR_TM_GIP_VERSION (-2205)
/** The GIP update interval is too large. */
#define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206)
/** The timer has a bad clock enum value, probably corruption. */
#define VERR_TM_TIMER_BAD_CLOCK (-2207)
/** The timer failed to reach a stable state. */
#define VERR_TM_TIMER_UNSTABLE_STATE (-2208)
/** Attempt to resume a running TSC. */
#define VERR_TM_TSC_ALREADY_TICKING (-2209)
/** Attempt to pause a paused TSC. */
#define VERR_TM_TSC_ALREADY_PAUSED (-2210)
/** Invalid value for cVirtualTicking. */
#define VERR_TM_VIRTUAL_TICKING_IPE (-2211)
/** @} */
/** @name Recompiled Execution Manager (REM) Status Codes
* @{
*/
/** Fatal error in virtual hardware. */
#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
/** Fatal error in the recompiler cpu. */
#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
/** Recompiler execution was interrupted by forced action. */
#define VINF_REM_INTERRUPED_FF 2302
/** Too many similar traps. This is a very useful debug only
* check (we don't do double/triple faults in REM). */
#define VERR_REM_TOO_MANY_TRAPS (-2304)
/** The REM is out of breakpoint slots. */
#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
/** The REM could not find any breakpoint on the specified address. */
#define VERR_REM_BP_NOT_FOUND (-2306)
/** @} */
/** @name Trap Manager / Monitor (TRPM) Status Codes
* @{
*/
/** No active trap. Cannot query or reset a non-existing trap. */
#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
/** Active trap. Cannot assert a new trap when one is already active. */
#define VERR_TRPM_ACTIVE_TRAP (-2401)
/** Reason for leaving RC: Guest tried to write to our IDT - fatal.
* The VM will be terminated assuming the worst, i.e. that the
* guest has read the idtr register. */
#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
/** Reason for leaving RC: Fatal trap in hypervisor. */
#define VERR_TRPM_DONT_PANIC (-2403)
/** Reason for leaving RC: Double Fault. */
#define VERR_TRPM_PANIC (-2404)
/** The exception was dispatched for raw-mode execution. */
#define VINF_TRPM_XCPT_DISPATCHED 2405
/** Bad TRPM_TRAP_IN_OP. */
#define VERR_TRPM_BAD_TRAP_IN_OP (-2406)
/** Internal processing error \#1 in TRPM. */
#define VERR_TRPM_IPE_1 (-2407)
/** Internal processing error \#2 in TRPM. */
#define VERR_TRPM_IPE_2 (-2408)
/** Internal processing error \#3 in TRPM. */
#define VERR_TRPM_IPE_3 (-2409)
/** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */
#define VERR_TRPM_HM_IPE (-2410)
/** @} */
/** @name Selector Manager / Monitor (SELM) Status Code
* @{
*/
/** Reason for leaving RC: Guest tried to write to our GDT - fatal.
* The VM will be terminated assuming the worst, i.e. that the
* guest has read the gdtr register. */
#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
/** Reason for leaving RC: Guest tried to write to our LDT - fatal.
* The VM will be terminated assuming the worst, i.e. that the
* guest has read the ldtr register. */
#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
/** Reason for leaving RC: Guest tried to write to our TSS - fatal.
* The VM will be terminated assuming the worst, i.e. that the
* guest has read the ltr register. */
#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
/** Reason for leaving RC: Sync the GDT table to solve a conflict. */
#define VINF_SELM_SYNC_GDT 2503
/** No valid TSS present. */
#define VERR_SELM_NO_TSS (-2504)
/** Invalid guest LDT selector. */
#define VERR_SELM_INVALID_LDT (-2505)
/** The guest LDT selector is out of bounds. */
#define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506)
/** Unknown error while reading the guest GDT during shadow table updating. */
#define VERR_SELM_GDT_READ_ERROR (-2507)
/** The guest GDT so full that we cannot find free space for our own
* selectors. */
#define VERR_SELM_GDT_TOO_FULL (-2508)
/** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */
#define VERR_SELM_HM_IPE (-2509)
/** @} */
/** @name I/O Manager / Monitor (IOM) Status Code
* @{
*/
/** The specified I/O port range was invalid.
* It was either empty or it was out of bounds. */
#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
/** The specified R0 or RC I/O port range didn't have a corresponding R3 range.
* IOMR3IOPortRegisterR3() must be called first. */
#define VERR_IOM_NO_R3_IOPORT_RANGE (-2601)
/** The specified I/O port range intruded on an existing range. There is
* a I/O port conflict between two device, or a device tried to register
* the same range twice. */
#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
/** The specified I/O port range was owned by some other device(s). Both registration
* and deregistration, but in the first case only RC and R0 ranges. */
#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
/** The specified MMIO range was invalid.
* It was either empty or it was out of bounds. */
#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
/** The specified R0 or RC MMIO range didn't have a corresponding R3 range.
* IOMR3MMIORegisterR3() must be called first. */
#define VERR_IOM_NO_R3_MMIO_RANGE (-2606)
/** The specified MMIO range was owned by some other device(s). Both registration
* and deregistration, but in the first case only RC and R0 ranges. */
#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
/** The specified MMIO range intruded on an existing range. There is
* a MMIO conflict between two device, or a device tried to register
* the same range twice. */
#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
/** The MMIO range specified for removal was not found. */
#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
/** The MMIO range specified for removal was invalid. The range didn't match
* quite match a set of existing ranges. It's not possible to remove parts of
* a MMIO range, only one or more full ranges. */
#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
/** An invalid I/O port size was specified for a read or write operation. */
#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
/** The MMIO handler was called for a bogus address! Internal error! */
#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
/** The MMIO handler experienced a problem with the disassembler. */
#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
#define VERR_IOM_IOPORT_UNUSED (-2614)
/** Unused MMIO register read, fill with 00. */
#define VINF_IOM_MMIO_UNUSED_00 2615
/** Unused MMIO register read, fill with FF. */
#define VINF_IOM_MMIO_UNUSED_FF 2616
/** Reason for leaving RZ: I/O port read. */
#define VINF_IOM_R3_IOPORT_READ 2620
/** Reason for leaving RZ: I/O port write. */
#define VINF_IOM_R3_IOPORT_WRITE 2621
/** Reason for leaving RZ: Pending I/O port write. Since there is also
* VMCPU_FF_IOM for this condition, it's ok to drop this status code for
* some other VINF_EM_XXX statuses. */
#define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622
/** Reason for leaving RZ: MMIO read. */
#define VINF_IOM_R3_MMIO_READ 2623
/** Reason for leaving RZ: MMIO write. */
#define VINF_IOM_R3_MMIO_WRITE 2624
/** Reason for leaving RZ: MMIO read/write. */
#define VINF_IOM_R3_MMIO_READ_WRITE 2625
/** Reason for leaving RZ: Pending MMIO write. Since there is also
* VMCPU_FF_IOM for this condition, it's ok to drop this status code for
* some other VINF_EM_XXX statuses. */
#define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626
/** IOMGCIOPortHandler was given an unexpected opcode. */
#define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630)
/** Internal processing error \#1 in the I/O port code. */
#define VERR_IOM_IOPORT_IPE_1 (-2631)
/** Internal processing error \#2 in the I/O port code. */
#define VERR_IOM_IOPORT_IPE_2 (-2632)
/** Internal processing error \#3 in the I/O port code. */
#define VERR_IOM_IOPORT_IPE_3 (-2633)
/** Internal processing error \#1 in the MMIO code. */
#define VERR_IOM_MMIO_IPE_1 (-2634)
/** Internal processing error \#2 in the MMIO code. */
#define VERR_IOM_MMIO_IPE_2 (-2635)
/** Internal processing error \#3 in the MMIO code. */
#define VERR_IOM_MMIO_IPE_3 (-2636)
/** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */
#define VERR_IOM_HM_IPE (-2637)
/** Internal processing error while merging status codes. */
#define VERR_IOM_FF_STATUS_IPE (-2638)
/** @} */
/** @name Virtual Machine Monitor (VMM) Status Codes
* @{
*/
/** Reason for leaving RZ: Calling host function. */
#define VINF_VMM_CALL_HOST 2700
/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
#define VERR_VMM_RING0_ASSERTION (-2701)
/** The hyper CR3 differs between PGM and CPUM. */
#define VERR_VMM_HYPER_CR3_MISMATCH (-2702)
/** Reason for leaving RZ: Illegal call to ring-3. */
#define VERR_VMM_RING3_CALL_DISABLED (-2703)
/** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib.
* If you just upgraded VirtualBox, please terminate all VMs and make sure
* that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again.
* If this error persists, try re-installing VirtualBox. */
#define VERR_VMM_R0_VERSION_MISMATCH (-2704)
/** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib.
* Re-install if you are a user. Developers should make sure the build is
* complete or try with a clean build. */
#define VERR_VMM_RC_VERSION_MISMATCH (-2705)
/** VMM set jump error. */
#define VERR_VMM_SET_JMP_ERROR (-2706)
/** VMM set jump stack overflow error. */
#define VERR_VMM_SET_JMP_STACK_OVERFLOW (-2707)
/** VMM set jump resume error. */
#define VERR_VMM_SET_JMP_ABORTED_RESUME (-2708)
/** VMM long jump error. */
#define VERR_VMM_LONG_JMP_ERROR (-2709)
/** Unknown ring-3 call attempted. */
#define VERR_VMM_UNKNOWN_RING3_CALL (-2710)
/** The ring-3 call didn't set an RC. */
#define VERR_VMM_RING3_CALL_NO_RC (-2711)
/** Reason for leaving RC: Caller the tracer in ring-0. */
#define VINF_VMM_CALL_TRACER (2712)
/** Internal processing error \#1 in the switcher code. */
#define VERR_VMM_SWITCHER_IPE_1 (-2713)
/** Reason for leaving RZ: Unknown call to ring-3. */
#define VINF_VMM_UNKNOWN_RING3_CALL (2714)
/** Attempted to use stub switcher. */
#define VERR_VMM_SWITCHER_STUB (-2715)
/** HM returned in the wrong state. */
#define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716)
/** SMAP enabled, but the AC flag was found to be clear - check the kernel
* log for details. */
#define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717)
/** NEM returned in the wrong state. */
#define VERR_VMM_WRONG_NEM_VMCPU_STATE (-2718)
/** @} */
/** @name Pluggable Device and Driver Manager (PDM) Status Codes
* @{
*/
/** An invalid LUN specification was given. */
#define VERR_PDM_NO_SUCH_LUN (-2800)
/** A device encountered an unknown configuration value.
* This means that the device is potentially misconfigured and the device
* construction or unit attachment failed because of this. */
#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
/** The above driver doesn't export a interface required by a driver being
* attached to it. Typical misconfiguration problem. */
#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
/** The below driver doesn't export a interface required by the drive
* having attached it. Typical misconfiguration problem. */
#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
/** A device didn't find a required interface with an attached driver.
* Typical misconfiguration problem. */
#define VERR_PDM_MISSING_INTERFACE (-2804)
/** A driver encountered an unknown configuration value.
* This means that the driver is potentially misconfigured and the driver
* construction failed because of this. */
#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
/** The PCI bus assigned to a device didn't have room for it.
* Either too many devices are configured on the same PCI bus, or there are
* some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
/** A queue is out of free items, the queueing operation failed. */
#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
/** Not possible to attach further drivers to the driver.
* A driver which doesn't support attachments (below of course) will
* return this status code if it found that further drivers were configured
* to be attached to it. */
#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
/** Not possible to attach drivers to the device.
* A device which doesn't support attachments (below of course) will
* return this status code if it found that drivers were configured
* to be attached to it. */
#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
/** No attached driver.
* The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
* this error when no driver was configured to be attached. */
#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
/** The media geometry hasn't been set yet, so it cannot be obtained.
* The caller should then calculate the geometry from the media size. */
#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
/** The media translation hasn't been set yet, so it cannot be obtained.
* The caller should then guess the translation. */
#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
/** The media is not mounted, operation requires a mounted media. */
#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
/** Mount failed because a media was already mounted. Unmount the media
* and retry the mount. */
#define VERR_PDM_MEDIA_MOUNTED (-2814)
/** The media is locked and cannot be unmounted. */
#define VERR_PDM_MEDIA_LOCKED (-2815)
/** No 'Type' attribute in the DrvBlock configuration.
* Misconfiguration. */
#define VERR_PDM_BLOCK_NO_TYPE (-2816)
/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
* Misconfiguration. */
#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
* Misconfiguration. */
#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
/** The block driver type wasn't supported.
* Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
/** A attach or prepare mount call failed because the driver already
* had a driver attached. */
#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
/** An attempt on detaching a driver without anyone actually being attached, or
* performing any other operation on an attached driver. */
#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
/** The attached driver configuration is missing the 'Driver' attribute. */
#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
/** The configured driver wasn't found.
* Either the necessary driver modules wasn't loaded, the name was
* misspelled, or it was a misconfiguration. */
#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
/** The Ring-3 module was already loaded. */
#define VINF_PDM_ALREADY_LOADED (2824)
/** The name of the module clashed with an existing module. */
#define VERR_PDM_MODULE_NAME_CLASH (-2825)
/** Couldn't find any export for registration of drivers/devices. */
#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
/** A module name is too long. */
#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
/** Driver name clash. Another driver with the same name as the
* one being registered exists. */
#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
/** The version of the driver registration structure is unknown
* to this VBox version. Either mixing incompatible versions or
* the structure isn't correctly initialized. */
#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
/** Invalid entry in the driver registration structure. */
#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
/** Invalid host bit mask. */
#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
/** Not possible to detach a driver because the above driver/device
* doesn't support it. The above entity doesn't implement the pfnDetach call. */
#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
/** No PCI Bus is available to register the device with. This is usually a
* misconfiguration or in rare cases a buggy pci device. */
#define VERR_PDM_NO_PCI_BUS (-2833)
/** The device is not a registered PCI device and thus cannot
* perform any PCI operations. The device forgot to register it self. */
#define VERR_PDM_NOT_PCI_DEVICE (-2834)
/** The version of the device registration structure is unknown
* to this VBox version. Either mixing incompatible versions or
* the structure isn't correctly initialized. */
#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
/** Invalid entry in the device registration structure. */
#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
/** Invalid host bit mask. */
#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
/** The guest bit mask didn't match the guest being loaded. */
#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
/** Device name clash. Another device with the same name as the
* one being registered exists. */
#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
/** The device wasn't found. There was no registered device
* by that name. */
#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
/** The device instance was not found. */
#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
/** The device instance have no base interface. */
#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
/** The device instance have no such logical unit. */
#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
/** The driver instance could not be found. */
#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
/** Logical Unit was not found. */
#define VERR_PDM_LUN_NOT_FOUND (-2845)
/** The Logical Unit was found, but it had no driver attached to it. */
#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
/** The Logical Unit was found, but it had no driver attached to it. */
#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
/** No PIC device instance is registered with the current VM and thus
* the PIC operation cannot be performed. */
#define VERR_PDM_NO_PIC_INSTANCE (-2847)
/** No APIC device instance is registered with the current VM and thus
* the APIC operation cannot be performed. */
#define VERR_PDM_NO_APIC_INSTANCE (-2848)
/** No DMAC device instance is registered with the current VM and thus
* the DMA operation cannot be performed. */
#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
/** No RTC device instance is registered with the current VM and thus
* the RTC or CMOS operation cannot be performed. */
#define VERR_PDM_NO_RTC_INSTANCE (-2850)
/** Unable to open the host interface due to a sharing violation . */
#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
/** Unable to open the host interface. */
#define VERR_PDM_HIF_OPEN_FAILED (-2852)
/** The device doesn't support runtime driver attaching.
* The PDMDEVREG::pfnAttach callback function is NULL. */
#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
/** The driver doesn't support runtime driver attaching.
* The PDMDRVREG::pfnAttach callback function is NULL. */
#define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854)
/** Invalid host interface version. */
#define VERR_PDM_HIF_INVALID_VERSION (-2855)
/** The version of the USB device registration structure is unknown
* to this VBox version. Either mixing incompatible versions or
* the structure isn't correctly initialized. */
#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
/** Invalid entry in the device registration structure. */
#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
/** Driver name clash. Another driver with the same name as the
* one being registered exists. */
#define VERR_PDM_USB_NAME_CLASH (-2858)
/** The USB hub is already registered. */
#define VERR_PDM_USB_HUB_EXISTS (-2859)
/** Couldn't find any USB hubs to attach the device to. */
#define VERR_PDM_NO_USB_HUBS (-2860)
/** Couldn't find any free USB ports to attach the device to. */
#define VERR_PDM_NO_USB_PORTS (-2861)
/** Couldn't find the USB Proxy device. Using OSE? */
#define VERR_PDM_NO_USBPROXY (-2862)
/** The async completion template is still used. */
#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
/** The async completion task is already suspended. */
#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
/** The async completion task is not suspended. */
#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
/** The driver properties were invalid, and as a consequence construction
* failed. Caused my unusable media or similar problems. */
#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
/** Too many instances of a device. */
#define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867)
/** Too many instances of a driver. */
#define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868)
/** Too many instances of a usb device. */
#define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869)
/** The device instance structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870)
/** The device helper structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DEVHLPR3_VERSION_MISMATCH (-2871)
/** The USB device instance structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_USBINS_VERSION_MISMATCH (-2872)
/** The USB device helper structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873)
/** The driver instance structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874)
/** The driver helper structure version has changed.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875)
/** Generic device structure version mismatch.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876)
/** Generic USB device structure version mismatch.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877)
/** Generic driver structure version mismatch.
*
* If you have upgraded VirtualBox recently, please make sure you have
* terminated all VMs and upgraded any extension packs. If this error
* persists, try re-installing VirtualBox. */
#define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878)
/** PDMVMMDevHeapR3ToGCPhys failure. */
#define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879)
/** A legacy device isn't implementing the HPET notification interface. */
#define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880)
/** Internal processing error in the critical section code. */
#define VERR_PDM_CRITSECT_IPE (-2881)
/** The critical section being deleted was not found. */
#define VERR_PDM_CRITSECT_NOT_FOUND (-2882)
/** A PDMThread API was called by the wrong thread. */
#define VERR_PDM_THREAD_INVALID_CALLER (-2883)
/** Internal processing error \#1 in the PDM Thread code. */
#define VERR_PDM_THREAD_IPE_1 (-2884)
/** Internal processing error \#2 in the PDM Thread code. */
#define VERR_PDM_THREAD_IPE_2 (-2885)
/** Only one PCI function is supported per PDM device. */
#define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886)
/** Bad PCI configuration. */
#define VERR_PDM_BAD_PCI_CONFIG (-2887)
/** Internal processing error # in the PDM device code. */
#define VERR_PDM_DEV_IPE_1 (-2888)
/** Misconfigured driver chain transformation. */
#define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889)
/** The driver is already removed, not more transformations possible (at
* present). */
#define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890)
/** The PCI device isn't configured as a busmaster, physical memory access
* rejected. */
#define VERR_PDM_NOT_PCI_BUS_MASTER (-2891)
/** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */
#define VERR_PDM_HM_IPE (-2892)
/** The I/O request was canceled. */
#define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893)
/** There is not enough room to store the data. */
#define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894)
/** There is not enough data to satisfy the request. */
#define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895)
/** The I/O request ID is already existing. */
#define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896)
/** The I/O request ID was not found. */
#define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897)
/** The I/O request is in progress. */
#define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898
/** The I/O request is in an invalid state for this operation. */
#define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899)
/** @} */
/** @name Host-Guest Communication Manager (HGCM) Status Codes
* @{
*/
/** Requested service does not exist. */
#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
/** Service rejected client connection */
#define VINF_HGCM_CLIENT_REJECTED 2901
/** Command address is invalid. */
#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
/** Service will execute the command in background. */
#define VINF_HGCM_ASYNC_EXECUTE 2903
/** HGCM could not perform requested operation because of an internal error. */
#define VERR_HGCM_INTERNAL (-2904)
/** Invalid HGCM client id. */
#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
/** The HGCM is saving state. */
#define VINF_HGCM_SAVE_STATE (2906)
/** Requested service already exists. */
#define VERR_HGCM_SERVICE_EXISTS (-2907)
/** @} */
/** @name Network Address Translation Driver (DrvNAT) Status Codes
* @{
*/
/** Failed to find the DNS configured for this machine. */
#define VINF_NAT_DNS 3000
/** Failed to convert the specified Guest IP to a binary IP address.
* Malformed input. */
#define VERR_NAT_REDIR_GUEST_IP (-3001)
/** Failed while setting up a redirector rule.
* There probably is a conflict between the rule and some existing
* service on the computer. */
#define VERR_NAT_REDIR_SETUP (-3002)
/** @} */
/** @name HostIF Driver (DrvTUN) Status Codes
* @{
*/
/** The Host Interface Networking init program failed. */
#define VERR_HOSTIF_INIT_FAILED (-3100)
/** The Host Interface Networking device name is too long. */
#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
/** The Host Interface Networking name config IOCTL call failed. */
#define VERR_HOSTIF_IOCTL (-3102)
/** Failed to make the Host Interface Networking handle non-blocking. */
#define VERR_HOSTIF_BLOCKING (-3103)
/** If a Host Interface Networking filehandle was specified it's not allowed to
* have any init or term programs. */
#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
/** The Host Interface Networking terminate program failed. */
#define VERR_HOSTIF_TERM_FAILED (-3105)
/** @} */
/** @name VBox HDD Container (VD) Status Codes
* @{
*/
/** Invalid image type. */
#define VERR_VD_INVALID_TYPE (-3200)
/** Operation can't be done in current HDD container state. */
#define VERR_VD_INVALID_STATE (-3201)
/** Configuration value not found. */
#define VERR_VD_VALUE_NOT_FOUND (-3202)
/** Virtual HDD is not opened. */
#define VERR_VD_NOT_OPENED (-3203)
/** Requested image is not opened. */
#define VERR_VD_IMAGE_NOT_FOUND (-3204)
/** Image is read-only. */
#define VERR_VD_IMAGE_READ_ONLY (-3205)
/** Geometry hasn't been set. */
#define VERR_VD_GEOMETRY_NOT_SET (-3206)
/** No data for this block in image. */
#define VERR_VD_BLOCK_FREE (-3207)
/** Differencing and parent images can't be used together due to UUID. */
#define VERR_VD_UUID_MISMATCH (-3208)
/** Asynchronous I/O request finished. */
#define VINF_VD_ASYNC_IO_FINISHED 3209
/** Asynchronous I/O is not finished yet. */
#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
/** The image is too small or too large for this format. */
#define VERR_VD_INVALID_SIZE (-3211)
/** Configuration value is unknown. This indicates misconfiguration. */
#define VERR_VD_UNKNOWN_CFG_VALUES (-3212)
/** Interface is unknown. This indicates misconfiguration. */
#define VERR_VD_UNKNOWN_INTERFACE (-3213)
/** The DEK for disk encryption is missing. */
#define VERR_VD_DEK_MISSING (-3214)
/** The provided password to decrypt the DEK was incorrect. */
#define VERR_VD_PASSWORD_INCORRECT (-3215)
/** Generic: Invalid image file header. Use this for plugins. */
#define VERR_VD_GEN_INVALID_HEADER (-3220)
/** VDI: Invalid image file header. */
#define VERR_VD_VDI_INVALID_HEADER (-3230)
/** VDI: Invalid image file header: invalid signature. */
#define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
/** VDI: Invalid image file header: invalid version. */
#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
/** Comment string is too long. */
#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
/** VMDK: Invalid image file header. */
#define VERR_VD_VMDK_INVALID_HEADER (-3240)
/** VMDK: Invalid image file header: invalid version. */
#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
/** VMDK: Image property not found. */
#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
/** VMDK: Operation can't be done in current image state. */
#define VERR_VD_VMDK_INVALID_STATE (-3243)
/** VMDK: Format is invalid/inconsistent. */
#define VERR_VD_VMDK_INVALID_FORMAT (-3244)
/** VMDK: Invalid write position. */
#define VERR_VD_VMDK_INVALID_WRITE (-3245)
/** iSCSI: Invalid header, i.e. dummy for validity check. */
#define VERR_VD_ISCSI_INVALID_HEADER (-3250)
/** iSCSI: Operation can't be done in current image state. */
#define VERR_VD_ISCSI_INVALID_STATE (-3251)
/** iSCSI: Invalid device type (not a disk). */
#define VERR_VD_ISCSI_INVALID_TYPE (-3252)
/** iSCSI: Initiator secret not decrypted */
#define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253)
/** VHD: Invalid image file header. */
#define VERR_VD_VHD_INVALID_HEADER (-3260)
/** Parallels HDD: Invalid image file header. */
#define VERR_VD_PARALLELS_INVALID_HEADER (-3265)
/** DMG: Invalid image file header. */
#define VERR_VD_DMG_INVALID_HEADER (-3267)
/** Raw: Invalid image file header. */
#define VERR_VD_RAW_INVALID_HEADER (-3270)
/** Raw: Invalid image file type. */
#define VERR_VD_RAW_INVALID_TYPE (-3271)
/** The backend needs more metadata before it can continue. */
#define VERR_VD_NOT_ENOUGH_METADATA (-3272)
/** Halt the current I/O context until further notification from the backend. */
#define VERR_VD_IOCTX_HALT (-3273)
/** The disk has a cache attached already. */
#define VERR_VD_CACHE_ALREADY_EXISTS (-3274)
/** There is no cache attached to the disk. */
#define VERR_VD_CACHE_NOT_FOUND (-3275)
/** The cache is not up to date with the image. */
#define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276)
/** The given range does not meet the required alignment. */
#define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277)
/** The discard operation is not supported for this image. */
#define VERR_VD_DISCARD_NOT_SUPPORTED (-3278)
/** The image is the correct format but is corrupted. */
#define VERR_VD_IMAGE_CORRUPTED (-3279)
/** Repairing the image is not supported. */
#define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280)
/** Repairing the image is not possible because the corruption is to severe. */
#define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281)
/** Reading from the image was not possible because the offset is out of the image range.
* This usually indicates that there is a minor corruption in the image meta data. */
#define VERR_VD_READ_OUT_OF_RANGE (-3282)
/** Block read was marked as free in the image and returned as a zero block. */
#define VINF_VD_NEW_ZEROED_BLOCK 3283
/** Unable to parse the XML in DMG file. */
#define VERR_VD_DMG_XML_PARSE_ERROR (-3284)
/** Unable to locate a usable DMG file within the XAR archive. */
#define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285)
/** The size of the raw image is not dividable by 512 */
#define VERR_VD_RAW_SIZE_MODULO_512 (-3286)
/** The size of the raw image is not dividable by 2048 */
#define VERR_VD_RAW_SIZE_MODULO_2048 (-3287)
/** The size of the raw optical image is too small (<= 32K) */
#define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288)
/** The size of the raw floppy image is too big (>2.88MB) */
#define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289)
/** Reducing the size is not supported */
#define VERR_VD_SHRINK_NOT_SUPPORTED (-3290)
/** @} */
/** @name VBox Guest Library (VBGL) Status Codes
* @{
*/
/** Library was not initialized. */
#define VERR_VBGL_NOT_INITIALIZED (-3300)
/** Virtual address was not allocated by the library. */
#define VERR_VBGL_INVALID_ADDR (-3301)
/** IOCtl to VBoxGuest driver failed. */
#define VERR_VBGL_IOCTL_FAILED (-3302)
/** @} */
/** @name VBox USB (VUSB) Status Codes
* @{
*/
/** No available ports on the hub.
* This error is returned when a device is attempted created and/or attached
* to a hub which is out of ports. */
#define VERR_VUSB_NO_PORTS (-3400)
/** The requested operation cannot be performed on a detached USB device. */
#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
/** Failed to allocate memory for a URB. */
#define VERR_VUSB_NO_URB_MEMORY (-3402)
/** General failure during URB queuing.
* This will go away when the queueing gets proper status code handling. */
#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
/** Device creation failed because the USB device name was not found. */
#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
/** Not permitted to open the USB device.
* The user doesn't have access to the device in the usbfs, check the mount options. */
#define VERR_VUSB_USBFS_PERMISSION (-3405)
/** The requested operation cannot be performed because the device
* is currently being reset. */
#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
/** The requested operation cannot be performed because the device
* is currently suspended. */
#define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407)
/** Not permitted to open the USB device.
* The user doesn't have access to the device node, check group memberships. */
#define VERR_VUSB_USB_DEVICE_PERMISSION (-3408)
/** @} */
/** @name VBox VGA Status Codes
* @{
*/
/** One of the custom modes was incorrect.
* The format or bit count of the custom mode value is invalid. */
#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
/** The display connector is resizing. */
#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
/** Unexpected PCI region change during VGA saved state loading. */
#define VERR_VGA_UNEXPECTED_PCI_REGION_LOAD_CHANGE (-3502)
/** Unabled to locate or load the OpenGL library. */
#define VERR_VGA_GL_LOAD_FAILURE (-3503)
/** Unabled to locate an OpenGL symbol. */
#define VERR_VGA_GL_SYMBOL_NOT_FOUND (-3504)
/** @} */
/** @name Internal Networking Status Codes
* @{
*/
/** The networking interface to filter was not found. */
#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
/** The networking interface to filter was busy (used by someone). */
#define VERR_INTNET_FLT_IF_BUSY (-3601)
/** Failed to create or connect to a networking interface filter. */
#define VERR_INTNET_FLT_IF_FAILED (-3602)
/** The network already exists with a different trunk configuration. */
#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
/** The network already exists with a different security profile (restricted / public). */
#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
/** Failed to create a virtual network interface instance. */
#define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605)
/** Failed to retrieve a virtual network interface link ID. */
#define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606)
/** Failed to initialize a virtual network interface instance. */
#define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607)
/** Failed to open a virtual network interface instance. */
#define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608)
/** Failed to retrieve underlying (lower mac) link. */
#define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609)
/** Failed to open underlying link instance. */
#define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610)
/** Failed to get underlying link ID. */
#define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611)
/** @} */
/** @name Support Driver Status Codes
* @{
*/
/** The component factory was not found. */
#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
/** The component factories do not support the requested interface. */
#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
/** The service module was not found. */
#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
/** The host kernel is too old. */
#define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703)
/** Bad VTG magic value. */
#define VERR_SUPDRV_VTG_MAGIC (-3704)
/** Bad VTG bit count value. */
#define VERR_SUPDRV_VTG_BITS (-3705)
/** Bad VTG header - misc. */
#define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706)
/** Bad VTG header - offset. */
#define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707)
/** Bad VTG header - offset. */
#define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708)
/** Bad VTG header - to low value. */
#define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709)
/** Bad VTG header - to high value. */
#define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710)
/** Bad VTG header - size value is not a multiple of the structure size. */
#define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711)
/** Bad VTG string table offset. */
#define VERR_SUPDRV_VTG_STRTAB_OFF (-3712)
/** Bad VTG string. */
#define VERR_SUPDRV_VTG_BAD_STRING (-3713)
/** VTG string is too long. */
#define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714)
/** Bad VTG attribute value. */
#define VERR_SUPDRV_VTG_BAD_ATTR (-3715)
/** Bad VTG provider descriptor. */
#define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716)
/** Bad VTG probe descriptor. */
#define VERR_SUPDRV_VTG_BAD_PROBE (-3717)
/** Bad VTG argument list descriptor. */
#define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718)
/** Bad VTG probe enabled data. */
#define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719)
/** Bad VTG probe location record. */
#define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720)
/** The VTG object for the session or image has already been registered. */
#define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721)
/** A driver may only register one VTG object per session. */
#define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722)
/** A tracer has already been registered. */
#define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723)
/** The session has no tracer associated with it. */
#define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724)
/** The tracer has already been opened in this sesssion. */
#define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725)
/** The tracer has not been opened. */
#define VERR_SUPDRV_TRACER_NOT_OPENED (-3726)
/** There is no tracer present. */
#define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727)
/** The tracer is unloading. */
#define VERR_SUPDRV_TRACER_UNLOADING (-3728)
/** Another thread in the session is talking to the tracer. */
#define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729)
/** The tracer cannot open it self in the same session. */
#define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730)
/** Bad argument flags. */
#define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731)
/** The session has reached the max number of (user mode) providers. */
#define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732)
/** The tracepoint provider object is too large. */
#define VERR_SUPDRV_TRACER_TOO_LARGE (-3733)
/** The probe location array isn't adjacent to the probe enable array. */
#define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734)
/** The user mode tracepoint provider has too many probe locations and
* probes. */
#define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735)
/** The user mode tracepoint provider string table is too large. */
#define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736)
/** The user mode tracepoint provider string table offset is bad. */
#define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737)
/** The VM process was denied access to vboxdrv because someone have managed to
* open the process or its main thread with too broad access rights. */
#define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738)
/** Error opening the ApiPort LPC object. */
#define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739)
/** Error enumerating all processes in the session. */
#define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740)
/** The CSRSS instance associated with the client process could not be
* located. */
#define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741)
/** Type error opening the ApiPort LPC object. */
#define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742)
/** Failed to measure the TSC delta between two CPUs. */
#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743)
/** Failed to calculate the TSC frequency. */
#define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744)
/** Failed to get the delta-adjusted TSC value. */
#define VERR_SUPDRV_TSC_READ_FAILED (-3745)
/** Failed to measure the TSC delta between two CPUs, continue without any
* TSC-delta. */
#define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746
/** A TSC-delta measurement request is currently being serviced. */
#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747)
/** The process trying to open VBoxDrv is not a budding VM process (1). */
#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748)
/** The process trying to open VBoxDrv is not a budding VM process (2). */
#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749)
/** Raw-mode is unavailable courtesy of Hyper-V. */
#define VERR_SUPDRV_NO_RAW_MODE_HYPER_V_ROOT (-7000)
/** @} */
/** @name Support Library Status Codes
* @{
*/
/** The specified path was not absolute (hardening). */
#define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750)
/** The specified path was not clean (hardening). */
#define VERR_SUPLIB_PATH_NOT_CLEAN (-3751)
/** The specified path is too long (hardening). */
#define VERR_SUPLIB_PATH_TOO_LONG (-3752)
/** The specified path is too short (hardening). */
#define VERR_SUPLIB_PATH_TOO_SHORT (-3753)
/** The specified path has too many components (hardening). */
#define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754)
/** The specified path is a root path (hardening). */
#define VERR_SUPLIB_PATH_IS_ROOT (-3755)
/** Failed to enumerate directory (hardening). */
#define VERR_SUPLIB_DIR_ENUM_FAILED (-3756)
/** Failed to stat a file/dir during enumeration (hardening). */
#define VERR_SUPLIB_STAT_ENUM_FAILED (-3757)
/** Failed to stat a file/dir (hardening). */
#define VERR_SUPLIB_STAT_FAILED (-3758)
/** Failed to fstat a native handle (hardening). */
#define VERR_SUPLIB_FSTAT_FAILED (-3759)
/** Found an illegal symbolic link (hardening). */
#define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760)
/** Found something which isn't a file nor a directory (hardening). */
#define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761)
/** The specified path is a directory and not a file (hardening). */
#define VERR_SUPLIB_IS_DIRECTORY (-3762)
/** The specified path is a file and not a directory (hardening). */
#define VERR_SUPLIB_IS_FILE (-3763)
/** The path is not the same object as the native handle (hardening). */
#define VERR_SUPLIB_NOT_SAME_OBJECT (-3764)
/** The owner is not root (hardening). */
#define VERR_SUPLIB_OWNER_NOT_ROOT (-3765)
/** The group is a non-system group and it has write access (hardening). */
#define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766)
/** The file or directory is world writable (hardening). */
#define VERR_SUPLIB_WORLD_WRITABLE (-3767)
/** The argv[0] of an internal application does not match the executable image
* path (hardening). */
#define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768)
/** The internal application does not reside in the correct place (hardening). */
#define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769)
/** Unable to establish trusted of VM process (0). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770)
/** Unable to establish trusted of VM process (1). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771)
/** Unable to establish trusted of VM process (2). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772)
/** Unable to establish trusted of VM process (3). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773)
/** Unable to establish trusted of VM process (4). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774)
/** Unable to establish trusted of VM process (5). */
#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775)
/** Unable to make text memory writeable (hardening). */
#define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776)
/** Unable to seal text memory again to protect against write access (hardening). */
#define VERR_SUPLIB_TEXT_NOT_SEALED (-3777)
/** Unexpected instruction encountered for which there is no patch strategy
* implemented (hardening). */
#define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778)
/** @} */
/** @name VBox GMM Status Codes
* @{
*/
/** The GMM is out of pages and needs to be give another chunk of user memory that
* it can lock down and borrow pages from. */
#define VERR_GMM_SEED_ME (-3800)
/** Unable to allocate more pages from the host system. */
#define VERR_GMM_OUT_OF_MEMORY (-3801)
/** Hit the global allocation limit.
* If you know there is still sufficient memory available, try raising the limit. */
#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
/** Hit the a VM account limit. */
#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
/** Attempt to free more memory than what was previously allocated. */
#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
/** Attempted to report too many pages as deflated. */
#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
/** The page to be freed or updated was not found. */
#define VERR_GMM_PAGE_NOT_FOUND (-3806)
/** The specified shared page was not actually private. */
#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
/** The specified shared page was not actually shared. */
#define VERR_GMM_PAGE_NOT_SHARED (-3808)
/** The page to be freed was already freed. */
#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
/** The page to be updated or freed was noted owned by the caller. */
#define VERR_GMM_NOT_PAGE_OWNER (-3810)
/** The specified chunk was not found. */
#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
/** The chunk has already been mapped into the process. */
#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
/** The chunk to be unmapped isn't actually mapped into the process. */
#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
/** The chunk has been mapped too many times already (impossible). */
#define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814)
/** The reservation or reservation update was declined - too many VMs, too
* little memory, and/or too low GMM configuration. */
#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815)
/** A GMM sanity check failed. */
#define VERR_GMM_IS_NOT_SANE (-3816)
/** Inserting a new chunk failed. */
#define VERR_GMM_CHUNK_INSERT (-3817)
/** Failed to obtain the GMM instance. */
#define VERR_GMM_INSTANCE (-3818)
/** Bad mutex semaphore flags. */
#define VERR_GMM_MTX_FLAGS (-3819)
/** Internal processing error in the page allocator. */
#define VERR_GMM_ALLOC_PAGES_IPE (-3820)
/** Invalid page count given to GMMR3FreePagesPerform. */
#define VERR_GMM_ACTUAL_PAGES_IPE (-3821)
/** The shared module name is too long. */
#define VERR_GMM_MODULE_NAME_TOO_LONG (-3822)
/** The shared module version string is too long. */
#define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823)
/** The shared module has too many regions. */
#define VERR_GMM_TOO_MANY_REGIONS (-3824)
/** The guest has reported too many modules. */
#define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825)
/** The guest has reported too many modules. */
#define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826)
/** The shared module is already registered. */
#define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827)
/** The shared module clashed address wise with a previously registered
* module. */
#define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828)
/** The shared module was not found. */
#define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829)
/** The size of the shared module was out of range. */
#define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830)
/** The size of the one or more regions in the shared module was out of
* range. */
#define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831)
/** @} */
/** @name VBox GVM Status Codes
* @{
*/
/** The GVM is out of VM handle space. */
#define VERR_GVM_TOO_MANY_VMS (-3900)
/** The EMT was not blocked at the time of the call. */
#define VINF_GVM_NOT_BLOCKED 3901
/** The EMT was not busy running guest code at the time of the call. */
#define VINF_GVM_NOT_BUSY_IN_GC 3902
/** RTThreadYield was called during a GVMMR0SchedPoll call. */
#define VINF_GVM_YIELDED 3903
/** @} */
/** @name VBox VMX Status Codes
* @{
*/
/** VMXON failed; possibly because it was already run before. */
#define VERR_VMX_VMXON_FAILED (-4000)
/** Invalid VMCS pointer.
* (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */
#define VERR_VMX_INVALID_VMCS_PTR (-4001)
/** Invalid VMCS index or write to read-only element. */
#define VERR_VMX_INVALID_VMCS_FIELD (-4002)
/** Reserved for future status code that we wish to OR with
* VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */
#define VERR_VMX_RESERVED (-4003)
/** Invalid VMXON pointer. */
#define VERR_VMX_INVALID_VMXON_PTR (-4004)
/** Unable to start VM execution. */
#define VERR_VMX_UNABLE_TO_START_VM (-4005)
/** Unable to switch due to invalid host state. */
#define VERR_VMX_INVALID_HOST_STATE (-4006)
/** VMX CPU extension not available in hardware. */
#define VERR_VMX_NO_VMX (-4009)
/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
/** Failed to enable and lock VT-x features. */
#define VERR_VMX_MSR_LOCKING_FAILED (-4013)
/** Unable to switch due to invalid guest state. */
#define VERR_VMX_INVALID_GUEST_STATE (-4014)
/** Unexpected VM exit. */
#define VERR_VMX_UNEXPECTED_EXIT (-4015)
/** Unexpected VM exception. */
#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
/** Unexpected interruption exit type. */
#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017)
/** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */
#define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018)
/** Undefined VM exit code. */
#define VERR_VMX_UNDEFINED_EXIT_CODE (-4019)
/** VMPTRLD failed; possibly because of invalid VMCS launch-state. */
#define VERR_VMX_VMPTRLD_FAILED (-4021)
/** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */
#define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022)
/** Internal VMX processing error no 1. */
#define VERR_VMX_IPE_1 (-4023)
/** Internal VMX processing error no 2. */
#define VERR_VMX_IPE_2 (-4024)
/** Internal VMX processing error no 3. */
#define VERR_VMX_IPE_3 (-4025)
/** Internal VMX processing error no 4. */
#define VERR_VMX_IPE_4 (-4026)
/** Internal VMX processing error no 5. */
#define VERR_VMX_IPE_5 (-4027)
/** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */
#define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028)
/** VT-x features disabled by the BIOS. */
#define VERR_VMX_MSR_VMX_DISABLED (-4029)
/** VT-x VMCS field cache invalid. */
#define VERR_VMX_VMCS_FIELD_CACHE_INVALID (-4030)
/** Failed to set VMXON enable bit while enabling VT-x through the MSR. */
#define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4031)
/** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */
#define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4032)
/** An operation caused a nested-guest VM-exit. */
#define VINF_VMX_VMEXIT 4033
/** Generic VM-entry failure. */
#define VERR_VMX_VMENTRY_FAILED (-4033)
/** Generic VM-exit failure. */
#define VERR_VMX_VMEXIT_FAILED (-4034)
/** The requested nested-guest VMX intercept is not active or not in
* nested-guest execution mode. */
#define VINF_VMX_INTERCEPT_NOT_ACTIVE 4035
/** The behavior of the instruction/operation is modified/needs modification
* in VMX non-root mode. */
#define VINF_VMX_MODIFIES_BEHAVIOR 4036
/** VMLAUNCH/VMRESUME succeeded, can enter nested-guest execution. */
#define VINF_VMX_VMLAUNCH_VMRESUME 4037
/** VT-x VMCS launch state invalid. */
#define VERR_VMX_INVALID_VMCS_LAUNCH_STATE (-4038)
/** @} */
/** @name VBox SVM Status Codes
* @{
*/
/** Unable to start VM execution. */
#define VERR_SVM_UNABLE_TO_START_VM (-4050)
/** AMD-V bit not set in K6_EFER MSR */
#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
/** AMD-V CPU extension not available. */
#define VERR_SVM_NO_SVM (-4052)
/** AMD-V CPU extension disabled (by BIOS). */
#define VERR_SVM_DISABLED (-4053)
/** AMD-V CPU extension in-use. */
#define VERR_SVM_IN_USE (-4054)
/** Invalid pVMCB. */
#define VERR_SVM_INVALID_PVMCB (-4055)
/** Unexpected SVM exit. */
#define VERR_SVM_UNEXPECTED_EXIT (-4056)
/** Unexpected SVM exception exit. */
#define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057)
/** Unexpected SVM patch type. */
#define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058)
/** Unable to start VM execution due to an invalid guest state. */
#define VERR_SVM_INVALID_GUEST_STATE (-4059)
/** Unknown or unrecognized SVM exit. */
#define VERR_SVM_UNKNOWN_EXIT (-4060)
/** Internal SVM processing error no 1. */
#define VERR_SVM_IPE_1 (-4061)
/** Internal SVM processing error no 2. */
#define VERR_SVM_IPE_2 (-4062)
/** Internal SVM processing error no 3. */
#define VERR_SVM_IPE_3 (-4063)
/** Internal SVM processing error no 4. */
#define VERR_SVM_IPE_4 (-4064)
/** Internal SVM processing error no 5. */
#define VERR_SVM_IPE_5 (-4065)
/** The nested-guest \#VMEXIT processing failed, initiate shutdown. */
#define VERR_SVM_VMEXIT_FAILED (-4066)
/** An operation caused a nested-guest SVM \#VMEXIT. */
#define VINF_SVM_VMEXIT 4067
/** VMRUN emulation succeeded, ready to immediately enter the nested-guest. */
#define VINF_SVM_VMRUN 4068
/** The requested nested-guest SVM intercept is not active or not in
* nested-guest execution mode. */
#define VINF_SVM_INTERCEPT_NOT_ACTIVE 4069
/** @} */
/** @name VBox HM Status Codes
* @{
*/
/** Host is about to go into suspend mode. */
#define VERR_HM_SUSPEND_PENDING (-4100)
/** Conflicting CFGM values. */
#define VERR_HM_CONFIG_MISMATCH (-4103)
/** Internal processing error in the HM init code. */
#define VERR_HM_ALREADY_ENABLED_IPE (-4104)
/** Unexpected MSR in the auto-load/store area. */
#define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105)
/** No 32-bit to 64-bit switcher in place. */
#define VERR_HM_NO_32_TO_64_SWITCHER (-4106)
/** HMR0Leave was called on the wrong CPU. */
#define VERR_HM_WRONG_CPU (-4107)
/** Internal processing error \#1 in the HM code. */
#define VERR_HM_IPE_1 (-4108)
/** Internal processing error \#2 in the HM code. */
#define VERR_HM_IPE_2 (-4109)
/** Wrong 32/64-bit switcher. */
#define VERR_HM_WRONG_SWITCHER (-4110)
/** Unknown I/O instruction. */
#define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111)
/** Unsupported CPU feature combination. */
#define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112)
/** Internal processing error \#3 in the HM code. */
#define VERR_HM_IPE_3 (-4113)
/** Internal processing error \#4 in the HM code. */
#define VERR_HM_IPE_4 (-4114)
/** Internal processing error \#5 in the HM code. */
#define VERR_HM_IPE_5 (-4115)
/** Invalid HM64ON32OP value. */
#define VERR_HM_INVALID_HM64ON32OP (-4116)
/** Resume guest execution after injecting a double-fault. */
#define VINF_HM_DOUBLE_FAULT 4117
/** Pending exception; continue guest execution. */
#define VINF_HM_PENDING_XCPT 4118
/** @} */
/** @name VBox Disassembler Status Codes
* @{
*/
/** Invalid opcode byte(s) */
#define VERR_DIS_INVALID_OPCODE (-4200)
/** Generic failure during disassembly. */
#define VERR_DIS_GEN_FAILURE (-4201)
/** No read callback. */
#define VERR_DIS_NO_READ_CALLBACK (-4202)
/** Invalid Mod/RM. */
#define VERR_DIS_INVALID_MODRM (-4203)
/** Invalid parameter index. */
#define VERR_DIS_INVALID_PARAMETER (-4204)
/** The instruction is too long. */
#define VERR_DIS_TOO_LONG_INSTR (-4206)
/** @} */
/** @name VBox Webservice Status Codes
* @{
*/
/** Authentication failed (ISessionManager::logon()) */
#define VERR_WEB_NOT_AUTHENTICATED (-4300)
/** Invalid format of managed object reference */
#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
/** Invalid session ID in managed object reference */
#define VERR_WEB_INVALID_SESSION_ID (-4302)
/** Invalid object ID in managed object reference */
#define VERR_WEB_INVALID_OBJECT_ID (-4303)
/** Unsupported interface for managed object reference */
#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
/** @} */
/** @name VBox PARAV Status Codes
* @{
*/
/** Switch back to host */
#define VINF_PARAV_SWITCH_TO_HOST 4400
/** @} */
/** @name VBox Video HW Acceleration command status
* @{
*/
/** command processing is pending, a completion handler will be called */
#define VINF_VHWA_CMD_PENDING 4500
/** @} */
/** @name VBox COM error codes
*
* @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses
* these for conversion that is lossless with respect to important COM
* status codes. These methods should be moved to the glue library.
* @{ */
/** Unexpected turn of events. */
#define VERR_COM_UNEXPECTED (-4600)
/** The base of the VirtualBox COM status codes (the lower value)
* corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */
#define VERR_COM_VBOX_LOWEST (-4699)
/** Object corresponding to the supplied arguments does not exist. */
#define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1)
/** Current virtual machine state prevents the operation. */
#define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2)
/** Virtual machine error occurred attempting the operation. */
#define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3)
/** File not accessible or erroneous file contents. */
#define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4)
/** IPRT error. */
#define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5)
/** Pluggable Device Manager error. */
#define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6)
/** Current object state prohibits operation. */
#define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7)
/** Host operating system related error. */
#define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8)
/** Requested operation is not supported. */
#define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9)
/** Invalid XML found. */
#define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10)
/** Current session state prohibits operation. */
#define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11)
/** Object being in use prohibits operation. */
#define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12)
/** Returned by callback methods which does not need to be called
* again because the client does not actually make use of them. */
#define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13)
/** @} */
/** @name VBox VMMDev Status codes
* @{
*/
/** CPU hotplug events from VMMDev are not monitored by the guest. */
#define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700)
/** @} */
/** @name VBox async I/O manager Status Codes
* @{
*/
/** Async I/O task is pending, a completion handler will be called. */
#define VINF_AIO_TASK_PENDING 4800
/** @} */
/** @name VBox Virtual SCSI Status Codes
* @{
*/
/** LUN type is not supported. */
#define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900)
/** LUN is already/still attached to a device. */
#define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901)
/** The specified LUN is invalid. */
#define VERR_VSCSI_LUN_INVALID (-4902)
/** The LUN is not attached to the device. */
#define VERR_VSCSI_LUN_NOT_ATTACHED (-4903)
/** The LUN is still busy. */
#define VERR_VSCSI_LUN_BUSY (-4904)
/** @} */
/** @name VBox FAM Status Codes
* @{
*/
/** FAM failed to open a connection. */
#define VERR_FAM_OPEN_FAILED (-5000)
/** FAM failed to add a file to the list to be monitored. */
#define VERR_FAM_MONITOR_FILE_FAILED (-5001)
/** FAM failed to add a directory to the list to be monitored. */
#define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002)
/** The connection to the FAM daemon was lost. */
#define VERR_FAM_CONNECTION_LOST (-5003)
/** @} */
/** @name PCI Passtrhough Status Codes
* @{
*/
/** RamPreAlloc not set.
* RAM pre-allocation is currently a requirement for PCI passthrough. */
#define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100)
/** VT-x/AMD-V not active.
* PCI passthrough currently works only if VT-x/AMD-V is active. */
#define VERR_PCI_PASSTHROUGH_NO_HM (-5101)
/** Nested paging not active.
* PCI passthrough currently works only if nested paging is active. */
#define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102)
/** @} */
/** @name GVMM Status Codes
* @{
*/
/** Internal error obtaining the GVMM instance. */
#define VERR_GVMM_INSTANCE (-5200)
/** GVMM does not support the range of CPUs present/possible on the host. */
#define VERR_GVMM_HOST_CPU_RANGE (-5201)
/** GVMM ran into some broken IPRT code. */
#define VERR_GVMM_BROKEN_IPRT (-5202)
/** Internal processing error \#1 in the GVMM code. */
#define VERR_GVMM_IPE_1 (-5203)
/** Internal processing error \#2 in the GVMM code. */
#define VERR_GVMM_IPE_2 (-5204)
/** Cannot destroy VM because not all other EMTs have deregistered. */
#define VERR_GVMM_NOT_ALL_EMTS_DEREGISTERED (-5205)
/** @} */
/** @name IEM Status Codes
* @{ */
/** The instruction is not yet implemented by IEM. */
#define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300)
/** Invalid operand size passed to an IEM function. */
#define VERR_IEM_INVALID_OPERAND_SIZE (-5301)
/** Invalid address mode passed to an IEM function. */
#define VERR_IEM_INVALID_ADDRESS_MODE (-5302)
/** Invalid effective segment register number passed to an IEM function. */
#define VERR_IEM_INVALID_EFF_SEG (-5303)
/** Invalid instruction length passed to an IEM function. */
#define VERR_IEM_INVALID_INSTR_LENGTH (-5304)
/** Internal status code for indicating that a selector isn't valid (LAR, LSL,
* VERR, VERW). This is not used outside the instruction implementations. */
#define VINF_IEM_SELECTOR_NOT_OK (5305)
/** Restart the current instruction. For testing only. */
#define VERR_IEM_RESTART_INSTRUCTION (-5389)
/** This particular aspect of the instruction is not yet implemented by IEM. */
#define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390)
/** Internal processing error \#1 in the IEM code. */
#define VERR_IEM_IPE_1 (-5391)
/** Internal processing error \#2 in the IEM code. */
#define VERR_IEM_IPE_2 (-5392)
/** Internal processing error \#3 in the IEM code. */
#define VERR_IEM_IPE_3 (-5393)
/** Internal processing error \#4 in the IEM code. */
#define VERR_IEM_IPE_4 (-5394)
/** Internal processing error \#5 in the IEM code. */
#define VERR_IEM_IPE_5 (-5395)
/** Internal processing error \#6 in the IEM code. */
#define VERR_IEM_IPE_6 (-5396)
/** Internal processing error \#7 in the IEM code. */
#define VERR_IEM_IPE_7 (-5397)
/** Internal processing error \#8 in the IEM code. */
#define VERR_IEM_IPE_8 (-5398)
/** Internal processing error \#9 in the IEM code. */
#define VERR_IEM_IPE_9 (-5399)
/** @} */
/** @name DBGC Status Codes
* @{ */
/** Status that causes DBGC to quit. */
#define VERR_DBGC_QUIT (-5400)
/** Async command pending. */
#define VWRN_DBGC_CMD_PENDING 5401
/** The command has already been registered. */
#define VWRN_DBGC_ALREADY_REGISTERED 5402
/** The command cannot be deregistered because has not been registered. */
#define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403)
/** Unknown breakpoint. */
#define VERR_DBGC_BP_NOT_FOUND (-5404)
/** The breakpoint already exists. */
#define VERR_DBGC_BP_EXISTS (-5405)
/** The breakpoint has no command. */
#define VINF_DBGC_BP_NO_COMMAND 5406
/** Generic debugger command failure. */
#define VERR_DBGC_COMMAND_FAILED (-5407)
/** Logic bug in the DBGC code. */
#define VERR_DBGC_IPE (-5408)
/** The lowest parse status code. */
#define VERR_DBGC_PARSE_LOWEST (-5499)
/** Syntax error - too few arguments. */
#define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0)
/** Syntax error - too many arguments. */
#define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1)
/** Syntax error - too many arguments for static storage. */
#define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2)
/** Syntax error - expected binary operator. */
#define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3)
/** Syntax error - the argument does not allow a range to be specified. */
#define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5)
/** Syntax error - unbalanced quotes. */
#define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6)
/** Syntax error - unbalanced parenthesis. */
#define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7)
/** Syntax error - an argument or subargument contains nothing useful. */
#define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8)
/** Syntax error - invalid operator usage. */
#define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9)
/** Syntax error - invalid numeric value. */
#define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10)
/** Syntax error - numeric overflow. */
#define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11)
/** Syntax error - invalid operation attempted. */
#define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12)
/** Syntax error - function not found. */
#define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13)
/** Syntax error - the specified function is not a function. */
#define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14)
/** Syntax error - out of scratch memory. */
#define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15)
/** Syntax error - out of regular heap memory. */
#define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16)
/** Syntax error - incorrect argument type. */
#define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17)
/** Syntax error - an undefined variable was referenced. */
#define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18)
/** Syntax error - a type conversion failed. */
#define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19)
/** Syntax error - you hit a debugger feature which isn't implemented yet.
* (Feel free to help implement it.) */
#define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20)
/** Syntax error - Couldn't satisfy a request for a specific result type. */
#define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21)
/** Syntax error - Cannot read symbol value, it is a set-only symbol. */
#define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22)
/** Syntax error - Invalid command name. */
#define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23)
/** Syntax error - Command not found. */
#define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24)
/** Syntax error - buggy parser. */
#define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25)
/** @} */
/** @name Support driver/library shared verification status codes.
* @{ */
/** Process Verification Failure: The memory content does not match the image
* file. */
#define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600)
/** Process Verification Failure: The memory protection of a image file section
* does not match what the section header prescribes. */
#define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601)
/** Process Verification Failure: One of the section in the image file is not
* mapped into memory. */
#define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602)
/** Process Verification Failure: One of the section in the image file is not
* fully mapped into memory. */
#define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603)
/** Process Verification Failure: Bad file alignment value in image header. */
#define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604)
/** Process Verification Failure: Bad image base in header. */
#define VERR_SUP_VP_BAD_IMAGE_BASE (-5605)
/** Process Verification Failure: Bad image signature. */
#define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606)
/** Process Verification Failure: Bad image size. */
#define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607)
/** Process Verification Failure: Bad new-header offset in the MZ header. */
#define VERR_SUP_VP_BAD_MZ_OFFSET (-5608)
/** Process Verification Failure: Bad optional header field. */
#define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609)
/** Process Verification Failure: Bad section alignment value in image
* header. */
#define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610)
/** Process Verification Failure: Bad section raw data size. */
#define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611)
/** Process Verification Failure: Bad virtual section address. */
#define VERR_SUP_VP_BAD_SECTION_RVA (-5612)
/** Process Verification Failure: Bad virtual section size. */
#define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613)
/** Process Verification Failure: Bad size of image header. */
#define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614)
/** Process Verification Failure: The process is being debugged. */
#define VERR_SUP_VP_DEBUGGED (-5615)
/** Process Verification Failure: A DLL was found more than once. */
#define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616)
/** Process Verification Failure: Image section region is too large. */
#define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617)
/** Process Verification Failure: Executable file name and process image name
* does not match up. */
#define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618)
/** Process Verification Failure: Found executable memory allocated in the
* process. There is only supposed be executable memory associated with
* image file mappings (DLLs & EXE). */
#define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619)
/** Process Verification Failure: There is more than one known executable mapped
* into the process. */
#define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620)
/** Process Verification Failure: Error closing image file handle. */
#define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621)
/** Process Verification Failure: Error opening image file. */
#define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622)
/** Process Verification Failure: Error reading image file header. */
#define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623)
/** Process Verification Failure: Image mapping is bogus as the first region
* has different AllocationBase and BaseAddress values, indicating that a
* section was unmapped or otherwise tampered with. */
#define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624)
/** Process Verification Failure: Error reading process memory for comparing
* with disk data. */
#define VERR_SUP_VP_MEMORY_READ_ERROR (-5625)
/** Process Verification Failure: Found no executable mapped into the process
* address space. */
#define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626)
/** Process Verification Failure: An image mapping failed to report a name. */
#define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627)
/** Process Verification Failure: No KERNE32.DLL mapping found. This is
* impossible. */
#define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628)
/** Process Verification Failure: Error allocating memory. */
#define VERR_SUP_VP_NO_MEMORY (-5629)
/** Process Verification Failure: Error allocating state memory or querying
* the system32 path. */
#define VERR_SUP_VP_NO_MEMORY_STATE (-5630)
/** Process Verification Failure: No NTDLL.DLL mapping found. This is
* impossible. */
#define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631)
/** Process Verification Failure: A DLL residing outside System32 was found
* in the process. */
#define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632)
/** Process Verification Failure: An unknown and unwanted DLL was found loaded
* into the process. */
#define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633)
/** Process Verification Failure: The name of an image file changes between
* mapping regions. */
#define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634)
/** Process Verification Failure: Error querying process name. */
#define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635)
/** Process Verification Failure: Error querying thread information. */
#define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636)
/** Process Verification Failure: Error query virtual memory information. */
#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637)
/** Process Verification Failure: Error query virtual memory mapping name. */
#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638)
/** Process Verification Failure: Error determining the full path of
* System32. */
#define VERR_SUP_VP_SYSTEM32_PATH (-5639)
/** Process Verification Failure: The process has more than one thread. */
#define VERR_SUP_VP_THREAD_NOT_ALONE (-5640)
/** Process Verification Failure: The image mapping is too large (>= 2GB). */
#define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641)
/** Process Verification Failure: The memory region is too large (>= 2GB). */
#define VERR_SUP_VP_TOO_LARGE_REGION (-5642)
/** Process Verification Failure: There are too many DLLs loaded. */
#define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643)
/** Process Verification Failure: An image has too many regions. */
#define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644)
/** Process Verification Failure: The process has too many virtual memory
* regions. */
#define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645)
/** Process Verification Failure: An image has too many sections. */
#define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646)
/** Process Verification Failure: An image is targeting an unexpected
* machine/CPU. */
#define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647)
/** Process Verification Failure: Unexpected section protection flag
* combination. */
#define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648)
/** Process Verification Failure: Expected the process and exe to have forced
* integrity checking enabled (verifying signatures). */
#define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649)
/** Process Verification Failure: Expected the process and exe to have dynamic
* base enabled. */
#define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650)
/** Process Verification Failure: Expected the process and exe to advertise
* NX compatibility. */
#define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651)
/** Process Verification Failure: The DllCharacteristics of the process
* does not match the value in the optional header in the exe file. */
#define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652)
/** Process Verification Failure: The ImageCharacteristics of the process
* does not match the value in the file header in the exe file. */
#define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653)
/** Process Verification Failure: Error querying image information. */
#define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654)
/** Process Verification Failure: Error querying debug port. */
#define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655)
/** WinVerifyTrust failed with an unexpected status code when using the
* catalog-file approach. */
#define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656)
/** The image is required to be signed with the same certificate as the rest
* of VirtualBox. */
#define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657)
/** Internal processing error: Not build certificate. */
#define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658)
/** The image requires to be signed using the kernel-code signing process. */
#define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659)
/** Unexpected number of valid paths. */
#define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660)
/** The image is required to force integrity checks. */
#define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661)
/** Process Verification Failure: Symantec Endpoint Protection must be
* disabled for the VirtualBox VM processes.
* http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */
#define VERR_SUP_VP_SYSFER_DLL (-5662)
/** Process Purification Failure: KERNE32.DLL already mapped into the initial
* process (suspended). */
#define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663)
/** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of
* executable memory which shouldn't be present in the process. */
#define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664)
/** Process Purification Failure: Both NtUnmapViewOfSetion and
* NtProtectVirtualMemory failed to get rid of or passify an non-image
* executable mapping. */
#define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665)
/** Process Purification Failure: Unknown memory type of executable memory. */
#define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666)
/** The image file is not owned by TrustedInstaller is it should be. */
#define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667)
/** The image is outside the expected range. */
#define VERR_SUP_VP_IMAGE_TOO_BIG (-5668)
/** Stub process not found so it cannot be revalidated when vboxdrv is opened
* by the VM process. */
#define VERR_SUP_VP_STUB_NOT_FOUND (-5669)
/** Error opening the stub process for revalidation when vboxdrv is opened by
* the VM process. */
#define VERR_SUP_VP_STUB_OPEN_ERROR (-5670)
/** Stub process thread not found during revalidation upon vboxdrv opening by
* the VM process. */
#define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671)
/** Error opening the stub process thread for revalidation when vboxdrv is
* opened by the VM process. */
#define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672)
/** Process Purification Failure: NtAllocateVirtualMemory failed to get us
* suitable replacement memory for a chunk of executable memory that
* shouldn't be present in our process. (You will only see this message if you
* got potentially fatally buggy anti-virus software installed.) */
#define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673)
/** Error getting the file mode. */
#define VERR_SUP_VP_FILE_MODE_ERROR (-5674)
/** Error creating an event semaphore for used with asynchronous reads. */
#define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675)
/** Undesirable module. */
#define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676)
/** @} */
/** @name VBox Extension Pack Status Codes
* @{
*/
/** The host is not supported. Uninstall the extension pack.
* Returned by the VBOXEXTPACKREG::pfnInstalled. */
#define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000)
/** The VirtualBox version is not supported by one of the extension packs.
*
* You have probably upgraded VirtualBox recently. Please upgrade the
* extension packs to versions compatible with this VirtualBox release.
*/
#define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001)
/** @} */
/** @name VBox Guest Control Status Codes
* @{
*/
/** Guest side reported an error. */
#define VERR_GSTCTL_GUEST_ERROR (-6200)
/** A guest control object has changed its overall status. */
#define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220
/** Guest process is in a wrong state. */
#define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221)
/** Maximum (context ID) sessions have been reached. */
#define VERR_GSTCTL_MAX_CID_SESSIONS_REACHED (-6222)
/** Maximum (context ID) objects have been reached. */
#define VERR_GSTCTL_MAX_CID_OBJECTS_REACHED (-6223)
/** Maximum (context ID object) count has been reached. */
#define VERR_GSTCTL_MAX_CID_COUNT_REACHED (-6224)
/** Started guest process terminated with an exit code <> 0. */
#define VERR_GSTCTL_PROCESS_EXIT_CODE (-6225)
/** @} */
/** @name GIM Status Codes
* @{
*/
/** No GIM provider is configured for this VM. */
#define VERR_GIM_NOT_ENABLED (-6300)
/** GIM internal processing error \#1. */
#define VERR_GIM_IPE_1 (-6301)
/** GIM internal processing error \#2. */
#define VERR_GIM_IPE_2 (-6302)
/** GIM internal processing error \#3. */
#define VERR_GIM_IPE_3 (-6303)
/** The GIM provider does not support any paravirtualized TSC. */
#define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304)
/** The guest has not setup use of the paravirtualized TSC. */
#define VERR_GIM_PVTSC_NOT_ENABLED (-6305)
/** Unknown or invalid GIM provider. */
#define VERR_GIM_INVALID_PROVIDER (-6306)
/** GIM generic operation failed. */
#define VERR_GIM_OPERATION_FAILED (-6307)
/** The GIM provider does not support any hypercalls. */
#define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308)
/** The guest has not setup use of the hypercalls. */
#define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309)
/** The GIM device is not registered with GIM when it ought to be. */
#define VERR_GIM_DEVICE_NOT_REGISTERED (-6310)
/** Hypercall cannot be enabled/performed due to access/permissions/CPL. */
#define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311)
/** Failed to read to a memory region while performing a hypercall. */
#define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312)
/** Failed to write to a memory region while performing a hypercall. */
#define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313)
/** Generic hypercall operation failure. */
#define VERR_GIM_HYPERCALL_FAILED (-6314)
/** No debug connection configured. */
#define VERR_GIM_NO_DEBUG_CONNECTION (-6315)
/** Return to ring-3 to perform the hypercall there. */
#define VINF_GIM_R3_HYPERCALL 6316
/** Continuing hypercall at the same RIP, continue guest execution. */
#define VINF_GIM_HYPERCALL_CONTINUING 6317
/** Instruction that triggers the hypercall is invalid/unrecognized. */
#define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318)
/** @} */
/** @name Main API Status Codes
* @{
*/
/** The configuration constructor in main failed due to a COM error. Check
* the release log of the VM for further details. */
#define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400)
/** The configuration constructor in main failed due to an internal consistency
* error. Consult the release log of the VM for further details. */
#define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401)
/** @} */
/** @name VBox Drag and Drop Status Codes
* @{
*/
/** Guest side reported an error. */
#define VERR_GSTDND_GUEST_ERROR (-6500)
/** @} */
/** @name Audio Status Codes
* @{
*/
/** Host backend couldn't be initialized. Happen if the audio server is not
* reachable, audio hardware is not available or similar. We should use the
* NULL audio driver. */
#define VERR_AUDIO_BACKEND_INIT_FAILED (-6600)
/** No host backend attached / available. */
#define VERR_AUDIO_BACKEND_NOT_ATTACHED (-6601)
/** No free input streams. */
#define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6602)
/** No free output streams. */
#define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6603)
/** Pending stream disable operation in progress. */
#define VERR_AUDIO_STREAM_PENDING_DISABLE (-6604)
/** There is more data available.
* This can happen due to a buffer wraparound of a buffer read/write operation. */
#define VINF_AUDIO_MORE_DATA_AVAILABLE (6605)
/** Stream is not ready for requested operation. */
#define VERR_AUDIO_STREAM_NOT_READY (-6605)
/** Stream could not be created.
* This might due to missing host (backend) drivers or a host not having the
* required hardware, or that the requested stream configuration
* is not supported by the host backend. */
#define VERR_AUDIO_STREAM_COULD_NOT_CREATE (-6606)
/** @} */
/** @name APIC Status Codes
* @{
*/
/** No pending interrupt. */
#define VERR_APIC_INTR_NOT_PENDING (-6700)
/** Pending interrupt is masked by TPR. */
#define VERR_APIC_INTR_MASKED_BY_TPR (-6701)
/** APIC did not accept the interrupt. */
#define VERR_APIC_INTR_DISCARDED (-6702)
/** @} */
/** @name NEM Status Codes
* @{
*/
/** NEM is not enabled. */
#define VERR_NEM_NOT_ENABLED (-6800)
/** NEM is not available. */
#define VERR_NEM_NOT_AVAILABLE (-6801)
/** NEM init failed. */
#define VERR_NEM_INIT_FAILED (-6802)
/** NEM init failed because of missing kernel API. */
#define VERR_NEM_MISSING_KERNEL_API (-6803)
/** NEM can only operate from ring-3. */
#define VERR_NEM_RING3_ONLY (-6804)
/** NEM failed to create a native VM instance. */
#define VERR_NEM_VM_CREATE_FAILED (-6805)
/** NEM failed to map page(s) into the VM. */
#define VERR_NEM_MAP_PAGES_FAILED (-6806)
/** NEM failed to unmap page(s) into the VM. */
#define VERR_NEM_UNMAP_PAGES_FAILED (-6807)
/** NEM failed to get registers. */
#define VERR_NEM_GET_REGISTERS_FAILED (-6808)
/** NEM failed to set registers. */
#define VERR_NEM_SET_REGISTERS_FAILED (-6809)
/** Get register caller must flush the TLB (not an error). */
#define VERR_NEM_FLUSH_TLB (-6810)
/** Get register caller must flush the TLB. */
#define VINF_NEM_FLUSH_TLB (6810)
/** NEM failed to set TSC. */
#define VERR_NEM_SET_TSC (-6811)
/** NEM internal processing error \#0. */
#define VERR_NEM_IPE_0 (-6890)
/** NEM internal processing error \#1. */
#define VERR_NEM_IPE_1 (-6891)
/** NEM internal processing error \#2. */
#define VERR_NEM_IPE_2 (-6892)
/** NEM internal processing error \#3. */
#define VERR_NEM_IPE_3 (-6893)
/** NEM internal processing error \#4. */
#define VERR_NEM_IPE_4 (-6894)
/** NEM internal processing error \#5. */
#define VERR_NEM_IPE_5 (-6895)
/** NEM internal processing error \#6. */
#define VERR_NEM_IPE_6 (-6896)
/** NEM internal processing error \#7. */
#define VERR_NEM_IPE_7 (-6897)
/** NEM internal processing error \#8. */
#define VERR_NEM_IPE_8 (-6898)
/** NEM internal processing error \#9. */
#define VERR_NEM_IPE_9 (-6899)
/** @} */
/** @name Recording Status Codes
* @{
*/
/** Codec was not found. */
#define VERR_RECORDING_CODEC_NOT_FOUND (-6900)
/** Codec initialization failed. */
#define VERR_RECORDING_CODEC_INIT_FAILED (-6902)
/** Codec is not supported. */
#define VERR_RECORDING_CODEC_NOT_SUPPORTED (-6903)
/** Format not supported by the codec. */
#define VERR_RECORDING_FORMAT_NOT_SUPPORTED (-6904)
/** Recording is not possible due to a set restriction. */
#define VERR_RECORDING_RESTRICTED (-6905)
/** Recording limit (time, size, ...) has been reached. */
#define VINF_RECORDING_LIMIT_REACHED (6906)
/** Recording limit (time, size, ...) has been reached. */
#define VERR_RECORDING_LIMIT_REACHED (-6906)
/** Recording has been throttled due to current settings.
* This e.g. can happen when submitting more video frames than
* the current FPS setting allows. */
#define VINF_RECORDING_THROTTLED (6907)
/** Recording has been throttled due to current settings.
* This e.g. can happen when submitting more video frames than
* the current FPS setting allows. */
#define VERR_RECORDING_THROTTLED (-6907)
/** @} */
/* SED-END */
/** @} */
#endif /* !VBOX_INCLUDED_err_h */
Mini Shell